PrinterProcessingStateDetail.php — Booking for Appointments and Events Calendar – Amelia 1.2.20

ameliabooking / vendor / microsoft / microsoft-graph / src / Model / PrinterProcessingStateDetail.php

ameliabooking / vendor / microsoft / microsoft-graph / src / Model Last commit date

PrinterProcessingStateDetail.php

859 lines

1	<?php
2	/**
3	* Copyright (c) Microsoft Corporation. All Rights Reserved. Licensed under the MIT License. See License in the project root for license information.
4	*
5	* PrinterProcessingStateDetail File
6	* PHP version 7
7	*
8	* @category Library
9	* @package Microsoft.Graph
10	* @copyright (c) Microsoft Corporation. All rights reserved.
11	* @license https://opensource.org/licenses/MIT MIT License
12	* @link https://graph.microsoft.com
13	*/
14	namespace Microsoft\Graph\Model;
15
16	use Microsoft\Graph\Core\Enum;
17
18	/**
19	* PrinterProcessingStateDetail class
20	*
21	* @category Model
22	* @package Microsoft.Graph
23	* @copyright (c) Microsoft Corporation. All rights reserved.
24	* @license https://opensource.org/licenses/MIT MIT License
25	* @link https://graph.microsoft.com
26	*/
27	class PrinterProcessingStateDetail extends Enum
28	{
29	/**
30	* The Enum PrinterProcessingStateDetail
31	*/
32	const PAUSED = "paused";
33	const MEDIA_JAM = "mediaJam";
34	const MEDIA_NEEDED = "mediaNeeded";
35	const MEDIA_LOW = "mediaLow";
36	const MEDIA_EMPTY = "mediaEmpty";
37	const COVER_OPEN = "coverOpen";
38	const INTERLOCK_OPEN = "interlockOpen";
39	const OUTPUT_TRAY_MISSING = "outputTrayMissing";
40	const OUTPUT_AREA_FULL = "outputAreaFull";
41	const MARKER_SUPPLY_LOW = "markerSupplyLow";
42	const MARKER_SUPPLY_EMPTY = "markerSupplyEmpty";
43	const INPUT_TRAY_MISSING = "inputTrayMissing";
44	const OUTPUT_AREA_ALMOST_FULL = "outputAreaAlmostFull";
45	const MARKER_WASTE_ALMOST_FULL = "markerWasteAlmostFull";
46	const MARKER_WASTE_FULL = "markerWasteFull";
47	const FUSER_OVER_TEMP = "fuserOverTemp";
48	const FUSER_UNDER_TEMP = "fuserUnderTemp";
49	const OTHER = "other";
50	const NONE = "none";
51	const MOVING_TO_PAUSED = "movingToPaused";
52	const SHUTDOWN = "shutdown";
53	const CONNECTING_TO_DEVICE = "connectingToDevice";
54	const TIMED_OUT = "timedOut";
55	const STOPPING = "stopping";
56	const STOPPED_PARTIALLY = "stoppedPartially";
57	const TONER_LOW = "tonerLow";
58	const TONER_EMPTY = "tonerEmpty";
59	const SPOOL_AREA_FULL = "spoolAreaFull";
60	const DOOR_OPEN = "doorOpen";
61	const OPTICAL_PHOTO_CONDUCTOR_NEAR_END_OF_LIFE = "opticalPhotoConductorNearEndOfLife";
62	const OPTICAL_PHOTO_CONDUCTOR_LIFE_OVER = "opticalPhotoConductorLifeOver";
63	const DEVELOPER_LOW = "developerLow";
64	const DEVELOPER_EMPTY = "developerEmpty";
65	const INTERPRETER_RESOURCE_UNAVAILABLE = "interpreterResourceUnavailable";
66	const UNKNOWN_FUTURE_VALUE = "unknownFutureValue";
67	const ALERT_REMOVAL_OF_BINARY_CHANGE_ENTRY = "alertRemovalOfBinaryChangeEntry";
68	const BANDER_ADDED = "banderAdded";
69	const BANDER_ALMOST_EMPTY = "banderAlmostEmpty";
70	const BANDER_ALMOST_FULL = "banderAlmostFull";
71	const BANDER_AT_LIMIT = "banderAtLimit";
72	const BANDER_CLOSED = "banderClosed";
73	const BANDER_CONFIGURATION_CHANGE = "banderConfigurationChange";
74	const BANDER_COVER_CLOSED = "banderCoverClosed";
75	const BANDER_COVER_OPEN = "banderCoverOpen";
76	const BANDER_EMPTY = "banderEmpty";
77	const BANDER_FULL = "banderFull";
78	const BANDER_INTERLOCK_CLOSED = "banderInterlockClosed";
79	const BANDER_INTERLOCK_OPEN = "banderInterlockOpen";
80	const BANDER_JAM = "banderJam";
81	const BANDER_LIFE_ALMOST_OVER = "banderLifeAlmostOver";
82	const BANDER_LIFE_OVER = "banderLifeOver";
83	const BANDER_MEMORY_EXHAUSTED = "banderMemoryExhausted";
84	const BANDER_MISSING = "banderMissing";
85	const BANDER_MOTOR_FAILURE = "banderMotorFailure";
86	const BANDER_NEAR_LIMIT = "banderNearLimit";
87	const BANDER_OFFLINE = "banderOffline";
88	const BANDER_OPENED = "banderOpened";
89	const BANDER_OVER_TEMPERATURE = "banderOverTemperature";
90	const BANDER_POWER_SAVER = "banderPowerSaver";
91	const BANDER_RECOVERABLE_FAILURE = "banderRecoverableFailure";
92	const BANDER_RECOVERABLE_STORAGE = "banderRecoverableStorage";
93	const BANDER_REMOVED = "banderRemoved";
94	const BANDER_RESOURCE_ADDED = "banderResourceAdded";
95	const BANDER_RESOURCE_REMOVED = "banderResourceRemoved";
96	const BANDER_THERMISTOR_FAILURE = "banderThermistorFailure";
97	const BANDER_TIMING_FAILURE = "banderTimingFailure";
98	const BANDER_TURNED_OFF = "banderTurnedOff";
99	const BANDER_TURNED_ON = "banderTurnedOn";
100	const BANDER_UNDER_TEMPERATURE = "banderUnderTemperature";
101	const BANDER_UNRECOVERABLE_FAILURE = "banderUnrecoverableFailure";
102	const BANDER_UNRECOVERABLE_STORAGE_ERROR = "banderUnrecoverableStorageError";
103	const BANDER_WARMING_UP = "banderWarmingUp";
104	const BINDER_ADDED = "binderAdded";
105	const BINDER_ALMOST_EMPTY = "binderAlmostEmpty";
106	const BINDER_ALMOST_FULL = "binderAlmostFull";
107	const BINDER_AT_LIMIT = "binderAtLimit";
108	const BINDER_CLOSED = "binderClosed";
109	const BINDER_CONFIGURATION_CHANGE = "binderConfigurationChange";
110	const BINDER_COVER_CLOSED = "binderCoverClosed";
111	const BINDER_COVER_OPEN = "binderCoverOpen";
112	const BINDER_EMPTY = "binderEmpty";
113	const BINDER_FULL = "binderFull";
114	const BINDER_INTERLOCK_CLOSED = "binderInterlockClosed";
115	const BINDER_INTERLOCK_OPEN = "binderInterlockOpen";
116	const BINDER_JAM = "binderJam";
117	const BINDER_LIFE_ALMOST_OVER = "binderLifeAlmostOver";
118	const BINDER_LIFE_OVER = "binderLifeOver";
119	const BINDER_MEMORY_EXHAUSTED = "binderMemoryExhausted";
120	const BINDER_MISSING = "binderMissing";
121	const BINDER_MOTOR_FAILURE = "binderMotorFailure";
122	const BINDER_NEAR_LIMIT = "binderNearLimit";
123	const BINDER_OFFLINE = "binderOffline";
124	const BINDER_OPENED = "binderOpened";
125	const BINDER_OVER_TEMPERATURE = "binderOverTemperature";
126	const BINDER_POWER_SAVER = "binderPowerSaver";
127	const BINDER_RECOVERABLE_FAILURE = "binderRecoverableFailure";
128	const BINDER_RECOVERABLE_STORAGE = "binderRecoverableStorage";
129	const BINDER_REMOVED = "binderRemoved";
130	const BINDER_RESOURCE_ADDED = "binderResourceAdded";
131	const BINDER_RESOURCE_REMOVED = "binderResourceRemoved";
132	const BINDER_THERMISTOR_FAILURE = "binderThermistorFailure";
133	const BINDER_TIMING_FAILURE = "binderTimingFailure";
134	const BINDER_TURNED_OFF = "binderTurnedOff";
135	const BINDER_TURNED_ON = "binderTurnedOn";
136	const BINDER_UNDER_TEMPERATURE = "binderUnderTemperature";
137	const BINDER_UNRECOVERABLE_FAILURE = "binderUnrecoverableFailure";
138	const BINDER_UNRECOVERABLE_STORAGE_ERROR = "binderUnrecoverableStorageError";
139	const BINDER_WARMING_UP = "binderWarmingUp";
140	const CAMERA_FAILURE = "cameraFailure";
141	const CHAMBER_COOLING = "chamberCooling";
142	const CHAMBER_FAILURE = "chamberFailure";
143	const CHAMBER_HEATING = "chamberHeating";
144	const CHAMBER_TEMPERATURE_HIGH = "chamberTemperatureHigh";
145	const CHAMBER_TEMPERATURE_LOW = "chamberTemperatureLow";
146	const CLEANER_LIFE_ALMOST_OVER = "cleanerLifeAlmostOver";
147	const CLEANER_LIFE_OVER = "cleanerLifeOver";
148	const CONFIGURATION_CHANGE = "configurationChange";
149	const DEACTIVATED = "deactivated";
150	const DELETED = "deleted";
151	const DIE_CUTTER_ADDED = "dieCutterAdded";
152	const DIE_CUTTER_ALMOST_EMPTY = "dieCutterAlmostEmpty";
153	const DIE_CUTTER_ALMOST_FULL = "dieCutterAlmostFull";
154	const DIE_CUTTER_AT_LIMIT = "dieCutterAtLimit";
155	const DIE_CUTTER_CLOSED = "dieCutterClosed";
156	const DIE_CUTTER_CONFIGURATION_CHANGE = "dieCutterConfigurationChange";
157	const DIE_CUTTER_COVER_CLOSED = "dieCutterCoverClosed";
158	const DIE_CUTTER_COVER_OPEN = "dieCutterCoverOpen";
159	const DIE_CUTTER_EMPTY = "dieCutterEmpty";
160	const DIE_CUTTER_FULL = "dieCutterFull";
161	const DIE_CUTTER_INTERLOCK_CLOSED = "dieCutterInterlockClosed";
162	const DIE_CUTTER_INTERLOCK_OPEN = "dieCutterInterlockOpen";
163	const DIE_CUTTER_JAM = "dieCutterJam";
164	const DIE_CUTTER_LIFE_ALMOST_OVER = "dieCutterLifeAlmostOver";
165	const DIE_CUTTER_LIFE_OVER = "dieCutterLifeOver";
166	const DIE_CUTTER_MEMORY_EXHAUSTED = "dieCutterMemoryExhausted";
167	const DIE_CUTTER_MISSING = "dieCutterMissing";
168	const DIE_CUTTER_MOTOR_FAILURE = "dieCutterMotorFailure";
169	const DIE_CUTTER_NEAR_LIMIT = "dieCutterNearLimit";
170	const DIE_CUTTER_OFFLINE = "dieCutterOffline";
171	const DIE_CUTTER_OPENED = "dieCutterOpened";
172	const DIE_CUTTER_OVER_TEMPERATURE = "dieCutterOverTemperature";
173	const DIE_CUTTER_POWER_SAVER = "dieCutterPowerSaver";
174	const DIE_CUTTER_RECOVERABLE_FAILURE = "dieCutterRecoverableFailure";
175	const DIE_CUTTER_RECOVERABLE_STORAGE = "dieCutterRecoverableStorage";
176	const DIE_CUTTER_REMOVED = "dieCutterRemoved";
177	const DIE_CUTTER_RESOURCE_ADDED = "dieCutterResourceAdded";
178	const DIE_CUTTER_RESOURCE_REMOVED = "dieCutterResourceRemoved";
179	const DIE_CUTTER_THERMISTOR_FAILURE = "dieCutterThermistorFailure";
180	const DIE_CUTTER_TIMING_FAILURE = "dieCutterTimingFailure";
181	const DIE_CUTTER_TURNED_OFF = "dieCutterTurnedOff";
182	const DIE_CUTTER_TURNED_ON = "dieCutterTurnedOn";
183	const DIE_CUTTER_UNDER_TEMPERATURE = "dieCutterUnderTemperature";
184	const DIE_CUTTER_UNRECOVERABLE_FAILURE = "dieCutterUnrecoverableFailure";
185	const DIE_CUTTER_UNRECOVERABLE_STORAGE_ERROR = "dieCutterUnrecoverableStorageError";
186	const DIE_CUTTER_WARMING_UP = "dieCutterWarmingUp";
187	const EXTRUDER_COOLING = "extruderCooling";
188	const EXTRUDER_FAILURE = "extruderFailure";
189	const EXTRUDER_HEATING = "extruderHeating";
190	const EXTRUDER_JAM = "extruderJam";
191	const EXTRUDER_TEMPERATURE_HIGH = "extruderTemperatureHigh";
192	const EXTRUDER_TEMPERATURE_LOW = "extruderTemperatureLow";
193	const FAN_FAILURE = "fanFailure";
194	const FAX_MODEM_LIFE_ALMOST_OVER = "faxModemLifeAlmostOver";
195	const FAX_MODEM_LIFE_OVER = "faxModemLifeOver";
196	const FAX_MODEM_MISSING = "faxModemMissing";
197	const FAX_MODEM_TURNED_OFF = "faxModemTurnedOff";
198	const FAX_MODEM_TURNED_ON = "faxModemTurnedOn";
199	const FOLDER_ADDED = "folderAdded";
200	const FOLDER_ALMOST_EMPTY = "folderAlmostEmpty";
201	const FOLDER_ALMOST_FULL = "folderAlmostFull";
202	const FOLDER_AT_LIMIT = "folderAtLimit";
203	const FOLDER_CLOSED = "folderClosed";
204	const FOLDER_CONFIGURATION_CHANGE = "folderConfigurationChange";
205	const FOLDER_COVER_CLOSED = "folderCoverClosed";
206	const FOLDER_COVER_OPEN = "folderCoverOpen";
207	const FOLDER_EMPTY = "folderEmpty";
208	const FOLDER_FULL = "folderFull";
209	const FOLDER_INTERLOCK_CLOSED = "folderInterlockClosed";
210	const FOLDER_INTERLOCK_OPEN = "folderInterlockOpen";
211	const FOLDER_JAM = "folderJam";
212	const FOLDER_LIFE_ALMOST_OVER = "folderLifeAlmostOver";
213	const FOLDER_LIFE_OVER = "folderLifeOver";
214	const FOLDER_MEMORY_EXHAUSTED = "folderMemoryExhausted";
215	const FOLDER_MISSING = "folderMissing";
216	const FOLDER_MOTOR_FAILURE = "folderMotorFailure";
217	const FOLDER_NEAR_LIMIT = "folderNearLimit";
218	const FOLDER_OFFLINE = "folderOffline";
219	const FOLDER_OPENED = "folderOpened";
220	const FOLDER_OVER_TEMPERATURE = "folderOverTemperature";
221	const FOLDER_POWER_SAVER = "folderPowerSaver";
222	const FOLDER_RECOVERABLE_FAILURE = "folderRecoverableFailure";
223	const FOLDER_RECOVERABLE_STORAGE = "folderRecoverableStorage";
224	const FOLDER_REMOVED = "folderRemoved";
225	const FOLDER_RESOURCE_ADDED = "folderResourceAdded";
226	const FOLDER_RESOURCE_REMOVED = "folderResourceRemoved";
227	const FOLDER_THERMISTOR_FAILURE = "folderThermistorFailure";
228	const FOLDER_TIMING_FAILURE = "folderTimingFailure";
229	const FOLDER_TURNED_OFF = "folderTurnedOff";
230	const FOLDER_TURNED_ON = "folderTurnedOn";
231	const FOLDER_UNDER_TEMPERATURE = "folderUnderTemperature";
232	const FOLDER_UNRECOVERABLE_FAILURE = "folderUnrecoverableFailure";
233	const FOLDER_UNRECOVERABLE_STORAGE_ERROR = "folderUnrecoverableStorageError";
234	const FOLDER_WARMING_UP = "folderWarmingUp";
235	const HIBERNATE = "hibernate";
236	const HOLD_NEW_JOBS = "holdNewJobs";
237	const IDENTIFY_PRINTER_REQUESTED = "identifyPrinterRequested";
238	const IMPRINTER_ADDED = "imprinterAdded";
239	const IMPRINTER_ALMOST_EMPTY = "imprinterAlmostEmpty";
240	const IMPRINTER_ALMOST_FULL = "imprinterAlmostFull";
241	const IMPRINTER_AT_LIMIT = "imprinterAtLimit";
242	const IMPRINTER_CLOSED = "imprinterClosed";
243	const IMPRINTER_CONFIGURATION_CHANGE = "imprinterConfigurationChange";
244	const IMPRINTER_COVER_CLOSED = "imprinterCoverClosed";
245	const IMPRINTER_COVER_OPEN = "imprinterCoverOpen";
246	const IMPRINTER_EMPTY = "imprinterEmpty";
247	const IMPRINTER_FULL = "imprinterFull";
248	const IMPRINTER_INTERLOCK_CLOSED = "imprinterInterlockClosed";
249	const IMPRINTER_INTERLOCK_OPEN = "imprinterInterlockOpen";
250	const IMPRINTER_JAM = "imprinterJam";
251	const IMPRINTER_LIFE_ALMOST_OVER = "imprinterLifeAlmostOver";
252	const IMPRINTER_LIFE_OVER = "imprinterLifeOver";
253	const IMPRINTER_MEMORY_EXHAUSTED = "imprinterMemoryExhausted";
254	const IMPRINTER_MISSING = "imprinterMissing";
255	const IMPRINTER_MOTOR_FAILURE = "imprinterMotorFailure";
256	const IMPRINTER_NEAR_LIMIT = "imprinterNearLimit";
257	const IMPRINTER_OFFLINE = "imprinterOffline";
258	const IMPRINTER_OPENED = "imprinterOpened";
259	const IMPRINTER_OVER_TEMPERATURE = "imprinterOverTemperature";
260	const IMPRINTER_POWER_SAVER = "imprinterPowerSaver";
261	const IMPRINTER_RECOVERABLE_FAILURE = "imprinterRecoverableFailure";
262	const IMPRINTER_RECOVERABLE_STORAGE = "imprinterRecoverableStorage";
263	const IMPRINTER_REMOVED = "imprinterRemoved";
264	const IMPRINTER_RESOURCE_ADDED = "imprinterResourceAdded";
265	const IMPRINTER_RESOURCE_REMOVED = "imprinterResourceRemoved";
266	const IMPRINTER_THERMISTOR_FAILURE = "imprinterThermistorFailure";
267	const IMPRINTER_TIMING_FAILURE = "imprinterTimingFailure";
268	const IMPRINTER_TURNED_OFF = "imprinterTurnedOff";
269	const IMPRINTER_TURNED_ON = "imprinterTurnedOn";
270	const IMPRINTER_UNDER_TEMPERATURE = "imprinterUnderTemperature";
271	const IMPRINTER_UNRECOVERABLE_FAILURE = "imprinterUnrecoverableFailure";
272	const IMPRINTER_UNRECOVERABLE_STORAGE_ERROR = "imprinterUnrecoverableStorageError";
273	const IMPRINTER_WARMING_UP = "imprinterWarmingUp";
274	const INPUT_CANNOT_FEED_SIZE_SELECTED = "inputCannotFeedSizeSelected";
275	const INPUT_MANUAL_INPUT_REQUEST = "inputManualInputRequest";
276	const INPUT_MEDIA_COLOR_CHANGE = "inputMediaColorChange";
277	const INPUT_MEDIA_FORM_PARTS_CHANGE = "inputMediaFormPartsChange";
278	const INPUT_MEDIA_SIZE_CHANGE = "inputMediaSizeChange";
279	const INPUT_MEDIA_TRAY_FAILURE = "inputMediaTrayFailure";
280	const INPUT_MEDIA_TRAY_FEED_ERROR = "inputMediaTrayFeedError";
281	const INPUT_MEDIA_TRAY_JAM = "inputMediaTrayJam";
282	const INPUT_MEDIA_TYPE_CHANGE = "inputMediaTypeChange";
283	const INPUT_MEDIA_WEIGHT_CHANGE = "inputMediaWeightChange";
284	const INPUT_PICK_ROLLER_FAILURE = "inputPickRollerFailure";
285	const INPUT_PICK_ROLLER_LIFE_OVER = "inputPickRollerLifeOver";
286	const INPUT_PICK_ROLLER_LIFE_WARN = "inputPickRollerLifeWarn";
287	const INPUT_PICK_ROLLER_MISSING = "inputPickRollerMissing";
288	const INPUT_TRAY_ELEVATION_FAILURE = "inputTrayElevationFailure";
289	const INPUT_TRAY_POSITION_FAILURE = "inputTrayPositionFailure";
290	const INSERTER_ADDED = "inserterAdded";
291	const INSERTER_ALMOST_EMPTY = "inserterAlmostEmpty";
292	const INSERTER_ALMOST_FULL = "inserterAlmostFull";
293	const INSERTER_AT_LIMIT = "inserterAtLimit";
294	const INSERTER_CLOSED = "inserterClosed";
295	const INSERTER_CONFIGURATION_CHANGE = "inserterConfigurationChange";
296	const INSERTER_COVER_CLOSED = "inserterCoverClosed";
297	const INSERTER_COVER_OPEN = "inserterCoverOpen";
298	const INSERTER_EMPTY = "inserterEmpty";
299	const INSERTER_FULL = "inserterFull";
300	const INSERTER_INTERLOCK_CLOSED = "inserterInterlockClosed";
301	const INSERTER_INTERLOCK_OPEN = "inserterInterlockOpen";
302	const INSERTER_JAM = "inserterJam";
303	const INSERTER_LIFE_ALMOST_OVER = "inserterLifeAlmostOver";
304	const INSERTER_LIFE_OVER = "inserterLifeOver";
305	const INSERTER_MEMORY_EXHAUSTED = "inserterMemoryExhausted";
306	const INSERTER_MISSING = "inserterMissing";
307	const INSERTER_MOTOR_FAILURE = "inserterMotorFailure";
308	const INSERTER_NEAR_LIMIT = "inserterNearLimit";
309	const INSERTER_OFFLINE = "inserterOffline";
310	const INSERTER_OPENED = "inserterOpened";
311	const INSERTER_OVER_TEMPERATURE = "inserterOverTemperature";
312	const INSERTER_POWER_SAVER = "inserterPowerSaver";
313	const INSERTER_RECOVERABLE_FAILURE = "inserterRecoverableFailure";
314	const INSERTER_RECOVERABLE_STORAGE = "inserterRecoverableStorage";
315	const INSERTER_REMOVED = "inserterRemoved";
316	const INSERTER_RESOURCE_ADDED = "inserterResourceAdded";
317	const INSERTER_RESOURCE_REMOVED = "inserterResourceRemoved";
318	const INSERTER_THERMISTOR_FAILURE = "inserterThermistorFailure";
319	const INSERTER_TIMING_FAILURE = "inserterTimingFailure";
320	const INSERTER_TURNED_OFF = "inserterTurnedOff";
321	const INSERTER_TURNED_ON = "inserterTurnedOn";
322	const INSERTER_UNDER_TEMPERATURE = "inserterUnderTemperature";
323	const INSERTER_UNRECOVERABLE_FAILURE = "inserterUnrecoverableFailure";
324	const INSERTER_UNRECOVERABLE_STORAGE_ERROR = "inserterUnrecoverableStorageError";
325	const INSERTER_WARMING_UP = "inserterWarmingUp";
326	const INTERLOCK_CLOSED = "interlockClosed";
327	const INTERPRETER_CARTRIDGE_ADDED = "interpreterCartridgeAdded";
328	const INTERPRETER_CARTRIDGE_DELETED = "interpreterCartridgeDeleted";
329	const INTERPRETER_COMPLEX_PAGE_ENCOUNTERED = "interpreterComplexPageEncountered";
330	const INTERPRETER_MEMORY_DECREASE = "interpreterMemoryDecrease";
331	const INTERPRETER_MEMORY_INCREASE = "interpreterMemoryIncrease";
332	const INTERPRETER_RESOURCE_ADDED = "interpreterResourceAdded";
333	const INTERPRETER_RESOURCE_DELETED = "interpreterResourceDeleted";
334	const LAMP_AT_EOL = "lampAtEol";
335	const LAMP_FAILURE = "lampFailure";
336	const LAMP_NEAR_EOL = "lampNearEol";
337	const LASER_AT_EOL = "laserAtEol";
338	const LASER_FAILURE = "laserFailure";
339	const LASER_NEAR_EOL = "laserNearEol";
340	const MAKE_ENVELOPE_ADDED = "makeEnvelopeAdded";
341	const MAKE_ENVELOPE_ALMOST_EMPTY = "makeEnvelopeAlmostEmpty";
342	const MAKE_ENVELOPE_ALMOST_FULL = "makeEnvelopeAlmostFull";
343	const MAKE_ENVELOPE_AT_LIMIT = "makeEnvelopeAtLimit";
344	const MAKE_ENVELOPE_CLOSED = "makeEnvelopeClosed";
345	const MAKE_ENVELOPE_CONFIGURATION_CHANGE = "makeEnvelopeConfigurationChange";
346	const MAKE_ENVELOPE_COVER_CLOSED = "makeEnvelopeCoverClosed";
347	const MAKE_ENVELOPE_COVER_OPEN = "makeEnvelopeCoverOpen";
348	const MAKE_ENVELOPE_EMPTY = "makeEnvelopeEmpty";
349	const MAKE_ENVELOPE_FULL = "makeEnvelopeFull";
350	const MAKE_ENVELOPE_INTERLOCK_CLOSED = "makeEnvelopeInterlockClosed";
351	const MAKE_ENVELOPE_INTERLOCK_OPEN = "makeEnvelopeInterlockOpen";
352	const MAKE_ENVELOPE_JAM = "makeEnvelopeJam";
353	const MAKE_ENVELOPE_LIFE_ALMOST_OVER = "makeEnvelopeLifeAlmostOver";
354	const MAKE_ENVELOPE_LIFE_OVER = "makeEnvelopeLifeOver";
355	const MAKE_ENVELOPE_MEMORY_EXHAUSTED = "makeEnvelopeMemoryExhausted";
356	const MAKE_ENVELOPE_MISSING = "makeEnvelopeMissing";
357	const MAKE_ENVELOPE_MOTOR_FAILURE = "makeEnvelopeMotorFailure";
358	const MAKE_ENVELOPE_NEAR_LIMIT = "makeEnvelopeNearLimit";
359	const MAKE_ENVELOPE_OFFLINE = "makeEnvelopeOffline";
360	const MAKE_ENVELOPE_OPENED = "makeEnvelopeOpened";
361	const MAKE_ENVELOPE_OVER_TEMPERATURE = "makeEnvelopeOverTemperature";
362	const MAKE_ENVELOPE_POWER_SAVER = "makeEnvelopePowerSaver";
363	const MAKE_ENVELOPE_RECOVERABLE_FAILURE = "makeEnvelopeRecoverableFailure";
364	const MAKE_ENVELOPE_RECOVERABLE_STORAGE = "makeEnvelopeRecoverableStorage";
365	const MAKE_ENVELOPE_REMOVED = "makeEnvelopeRemoved";
366	const MAKE_ENVELOPE_RESOURCE_ADDED = "makeEnvelopeResourceAdded";
367	const MAKE_ENVELOPE_RESOURCE_REMOVED = "makeEnvelopeResourceRemoved";
368	const MAKE_ENVELOPE_THERMISTOR_FAILURE = "makeEnvelopeThermistorFailure";
369	const MAKE_ENVELOPE_TIMING_FAILURE = "makeEnvelopeTimingFailure";
370	const MAKE_ENVELOPE_TURNED_OFF = "makeEnvelopeTurnedOff";
371	const MAKE_ENVELOPE_TURNED_ON = "makeEnvelopeTurnedOn";
372	const MAKE_ENVELOPE_UNDER_TEMPERATURE = "makeEnvelopeUnderTemperature";
373	const MAKE_ENVELOPE_UNRECOVERABLE_FAILURE = "makeEnvelopeUnrecoverableFailure";
374	const MAKE_ENVELOPE_UNRECOVERABLE_STORAGE_ERROR = "makeEnvelopeUnrecoverableStorageError";
375	const MAKE_ENVELOPE_WARMING_UP = "makeEnvelopeWarmingUp";
376	const MARKER_ADJUSTING_PRINT_QUALITY = "markerAdjustingPrintQuality";
377	const MARKER_CLEANER_MISSING = "markerCleanerMissing";
378	const MARKER_DEVELOPER_ALMOST_EMPTY = "markerDeveloperAlmostEmpty";
379	const MARKER_DEVELOPER_EMPTY = "markerDeveloperEmpty";
380	const MARKER_DEVELOPER_MISSING = "markerDeveloperMissing";
381	const MARKER_FUSER_MISSING = "markerFuserMissing";
382	const MARKER_FUSER_THERMISTOR_FAILURE = "markerFuserThermistorFailure";
383	const MARKER_FUSER_TIMING_FAILURE = "markerFuserTimingFailure";
384	const MARKER_INK_ALMOST_EMPTY = "markerInkAlmostEmpty";
385	const MARKER_INK_EMPTY = "markerInkEmpty";
386	const MARKER_INK_MISSING = "markerInkMissing";
387	const MARKER_OPC_MISSING = "markerOpcMissing";
388	const MARKER_PRINT_RIBBON_ALMOST_EMPTY = "markerPrintRibbonAlmostEmpty";
389	const MARKER_PRINT_RIBBON_EMPTY = "markerPrintRibbonEmpty";
390	const MARKER_PRINT_RIBBON_MISSING = "markerPrintRibbonMissing";
391	const MARKER_SUPPLY_ALMOST_EMPTY = "markerSupplyAlmostEmpty";
392	const MARKER_SUPPLY_MISSING = "markerSupplyMissing";
393	const MARKER_TONER_CARTRIDGE_MISSING = "markerTonerCartridgeMissing";
394	const MARKER_TONER_MISSING = "markerTonerMissing";
395	const MARKER_WASTE_INK_RECEPTACLE_ALMOST_FULL = "markerWasteInkReceptacleAlmostFull";
396	const MARKER_WASTE_INK_RECEPTACLE_FULL = "markerWasteInkReceptacleFull";
397	const MARKER_WASTE_INK_RECEPTACLE_MISSING = "markerWasteInkReceptacleMissing";
398	const MARKER_WASTE_MISSING = "markerWasteMissing";
399	const MARKER_WASTE_TONER_RECEPTACLE_ALMOST_FULL = "markerWasteTonerReceptacleAlmostFull";
400	const MARKER_WASTE_TONER_RECEPTACLE_FULL = "markerWasteTonerReceptacleFull";
401	const MARKER_WASTE_TONER_RECEPTACLE_MISSING = "markerWasteTonerReceptacleMissing";
402	const MATERIAL_EMPTY = "materialEmpty";
403	const MATERIAL_LOW = "materialLow";
404	const MATERIAL_NEEDED = "materialNeeded";
405	const MEDIA_DRYING = "mediaDrying";
406	const MEDIA_PATH_CANNOT_DUPLEX_MEDIA_SELECTED = "mediaPathCannotDuplexMediaSelected";
407	const MEDIA_PATH_FAILURE = "mediaPathFailure";
408	const MEDIA_PATH_INPUT_EMPTY = "mediaPathInputEmpty";
409	const MEDIA_PATH_INPUT_FEED_ERROR = "mediaPathInputFeedError";
410	const MEDIA_PATH_INPUT_JAM = "mediaPathInputJam";
411	const MEDIA_PATH_INPUT_REQUEST = "mediaPathInputRequest";
412	const MEDIA_PATH_JAM = "mediaPathJam";
413	const MEDIA_PATH_MEDIA_TRAY_ALMOST_FULL = "mediaPathMediaTrayAlmostFull";
414	const MEDIA_PATH_MEDIA_TRAY_FULL = "mediaPathMediaTrayFull";
415	const MEDIA_PATH_MEDIA_TRAY_MISSING = "mediaPathMediaTrayMissing";
416	const MEDIA_PATH_OUTPUT_FEED_ERROR = "mediaPathOutputFeedError";
417	const MEDIA_PATH_OUTPUT_FULL = "mediaPathOutputFull";
418	const MEDIA_PATH_OUTPUT_JAM = "mediaPathOutputJam";
419	const MEDIA_PATH_PICK_ROLLER_FAILURE = "mediaPathPickRollerFailure";
420	const MEDIA_PATH_PICK_ROLLER_LIFE_OVER = "mediaPathPickRollerLifeOver";
421	const MEDIA_PATH_PICK_ROLLER_LIFE_WARN = "mediaPathPickRollerLifeWarn";
422	const MEDIA_PATH_PICK_ROLLER_MISSING = "mediaPathPickRollerMissing";
423	const MOTOR_FAILURE = "motorFailure";
424	const OUTPUT_MAILBOX_SELECT_FAILURE = "outputMailboxSelectFailure";
425	const OUTPUT_MEDIA_TRAY_FAILURE = "outputMediaTrayFailure";
426	const OUTPUT_MEDIA_TRAY_FEED_ERROR = "outputMediaTrayFeedError";
427	const OUTPUT_MEDIA_TRAY_JAM = "outputMediaTrayJam";
428	const PERFORATER_ADDED = "perforaterAdded";
429	const PERFORATER_ALMOST_EMPTY = "perforaterAlmostEmpty";
430	const PERFORATER_ALMOST_FULL = "perforaterAlmostFull";
431	const PERFORATER_AT_LIMIT = "perforaterAtLimit";
432	const PERFORATER_CLOSED = "perforaterClosed";
433	const PERFORATER_CONFIGURATION_CHANGE = "perforaterConfigurationChange";
434	const PERFORATER_COVER_CLOSED = "perforaterCoverClosed";
435	const PERFORATER_COVER_OPEN = "perforaterCoverOpen";
436	const PERFORATER_EMPTY = "perforaterEmpty";
437	const PERFORATER_FULL = "perforaterFull";
438	const PERFORATER_INTERLOCK_CLOSED = "perforaterInterlockClosed";
439	const PERFORATER_INTERLOCK_OPEN = "perforaterInterlockOpen";
440	const PERFORATER_JAM = "perforaterJam";
441	const PERFORATER_LIFE_ALMOST_OVER = "perforaterLifeAlmostOver";
442	const PERFORATER_LIFE_OVER = "perforaterLifeOver";
443	const PERFORATER_MEMORY_EXHAUSTED = "perforaterMemoryExhausted";
444	const PERFORATER_MISSING = "perforaterMissing";
445	const PERFORATER_MOTOR_FAILURE = "perforaterMotorFailure";
446	const PERFORATER_NEAR_LIMIT = "perforaterNearLimit";
447	const PERFORATER_OFFLINE = "perforaterOffline";
448	const PERFORATER_OPENED = "perforaterOpened";
449	const PERFORATER_OVER_TEMPERATURE = "perforaterOverTemperature";
450	const PERFORATER_POWER_SAVER = "perforaterPowerSaver";
451	const PERFORATER_RECOVERABLE_FAILURE = "perforaterRecoverableFailure";
452	const PERFORATER_RECOVERABLE_STORAGE = "perforaterRecoverableStorage";
453	const PERFORATER_REMOVED = "perforaterRemoved";
454	const PERFORATER_RESOURCE_ADDED = "perforaterResourceAdded";
455	const PERFORATER_RESOURCE_REMOVED = "perforaterResourceRemoved";
456	const PERFORATER_THERMISTOR_FAILURE = "perforaterThermistorFailure";
457	const PERFORATER_TIMING_FAILURE = "perforaterTimingFailure";
458	const PERFORATER_TURNED_OFF = "perforaterTurnedOff";
459	const PERFORATER_TURNED_ON = "perforaterTurnedOn";
460	const PERFORATER_UNDER_TEMPERATURE = "perforaterUnderTemperature";
461	const PERFORATER_UNRECOVERABLE_FAILURE = "perforaterUnrecoverableFailure";
462	const PERFORATER_UNRECOVERABLE_STORAGE_ERROR = "perforaterUnrecoverableStorageError";
463	const PERFORATER_WARMING_UP = "perforaterWarmingUp";
464	const PLATFORM_COOLING = "platformCooling";
465	const PLATFORM_FAILURE = "platformFailure";
466	const PLATFORM_HEATING = "platformHeating";
467	const PLATFORM_TEMPERATURE_HIGH = "platformTemperatureHigh";
468	const PLATFORM_TEMPERATURE_LOW = "platformTemperatureLow";
469	const POWER_DOWN = "powerDown";
470	const POWER_UP = "powerUp";
471	const PRINTER_MANUAL_RESET = "printerManualReset";
472	const PRINTER_NMS_RESET = "printerNmsReset";
473	const PRINTER_READY_TO_PRINT = "printerReadyToPrint";
474	const PUNCHER_ADDED = "puncherAdded";
475	const PUNCHER_ALMOST_EMPTY = "puncherAlmostEmpty";
476	const PUNCHER_ALMOST_FULL = "puncherAlmostFull";
477	const PUNCHER_AT_LIMIT = "puncherAtLimit";
478	const PUNCHER_CLOSED = "puncherClosed";
479	const PUNCHER_CONFIGURATION_CHANGE = "puncherConfigurationChange";
480	const PUNCHER_COVER_CLOSED = "puncherCoverClosed";
481	const PUNCHER_COVER_OPEN = "puncherCoverOpen";
482	const PUNCHER_EMPTY = "puncherEmpty";
483	const PUNCHER_FULL = "puncherFull";
484	const PUNCHER_INTERLOCK_CLOSED = "puncherInterlockClosed";
485	const PUNCHER_INTERLOCK_OPEN = "puncherInterlockOpen";
486	const PUNCHER_JAM = "puncherJam";
487	const PUNCHER_LIFE_ALMOST_OVER = "puncherLifeAlmostOver";
488	const PUNCHER_LIFE_OVER = "puncherLifeOver";
489	const PUNCHER_MEMORY_EXHAUSTED = "puncherMemoryExhausted";
490	const PUNCHER_MISSING = "puncherMissing";
491	const PUNCHER_MOTOR_FAILURE = "puncherMotorFailure";
492	const PUNCHER_NEAR_LIMIT = "puncherNearLimit";
493	const PUNCHER_OFFLINE = "puncherOffline";
494	const PUNCHER_OPENED = "puncherOpened";
495	const PUNCHER_OVER_TEMPERATURE = "puncherOverTemperature";
496	const PUNCHER_POWER_SAVER = "puncherPowerSaver";
497	const PUNCHER_RECOVERABLE_FAILURE = "puncherRecoverableFailure";
498	const PUNCHER_RECOVERABLE_STORAGE = "puncherRecoverableStorage";
499	const PUNCHER_REMOVED = "puncherRemoved";
500	const PUNCHER_RESOURCE_ADDED = "puncherResourceAdded";
501	const PUNCHER_RESOURCE_REMOVED = "puncherResourceRemoved";
502	const PUNCHER_THERMISTOR_FAILURE = "puncherThermistorFailure";
503	const PUNCHER_TIMING_FAILURE = "puncherTimingFailure";
504	const PUNCHER_TURNED_OFF = "puncherTurnedOff";
505	const PUNCHER_TURNED_ON = "puncherTurnedOn";
506	const PUNCHER_UNDER_TEMPERATURE = "puncherUnderTemperature";
507	const PUNCHER_UNRECOVERABLE_FAILURE = "puncherUnrecoverableFailure";
508	const PUNCHER_UNRECOVERABLE_STORAGE_ERROR = "puncherUnrecoverableStorageError";
509	const PUNCHER_WARMING_UP = "puncherWarmingUp";
510	const RESUMING = "resuming";
511	const SCAN_MEDIA_PATH_FAILURE = "scanMediaPathFailure";
512	const SCAN_MEDIA_PATH_INPUT_EMPTY = "scanMediaPathInputEmpty";
513	const SCAN_MEDIA_PATH_INPUT_FEED_ERROR = "scanMediaPathInputFeedError";
514	const SCAN_MEDIA_PATH_INPUT_JAM = "scanMediaPathInputJam";
515	const SCAN_MEDIA_PATH_INPUT_REQUEST = "scanMediaPathInputRequest";
516	const SCAN_MEDIA_PATH_JAM = "scanMediaPathJam";
517	const SCAN_MEDIA_PATH_OUTPUT_FEED_ERROR = "scanMediaPathOutputFeedError";
518	const SCAN_MEDIA_PATH_OUTPUT_FULL = "scanMediaPathOutputFull";
519	const SCAN_MEDIA_PATH_OUTPUT_JAM = "scanMediaPathOutputJam";
520	const SCAN_MEDIA_PATH_PICK_ROLLER_FAILURE = "scanMediaPathPickRollerFailure";
521	const SCAN_MEDIA_PATH_PICK_ROLLER_LIFE_OVER = "scanMediaPathPickRollerLifeOver";
522	const SCAN_MEDIA_PATH_PICK_ROLLER_LIFE_WARN = "scanMediaPathPickRollerLifeWarn";
523	const SCAN_MEDIA_PATH_PICK_ROLLER_MISSING = "scanMediaPathPickRollerMissing";
524	const SCAN_MEDIA_PATH_TRAY_ALMOST_FULL = "scanMediaPathTrayAlmostFull";
525	const SCAN_MEDIA_PATH_TRAY_FULL = "scanMediaPathTrayFull";
526	const SCAN_MEDIA_PATH_TRAY_MISSING = "scanMediaPathTrayMissing";
527	const SCANNER_LIGHT_FAILURE = "scannerLightFailure";
528	const SCANNER_LIGHT_LIFE_ALMOST_OVER = "scannerLightLifeAlmostOver";
529	const SCANNER_LIGHT_LIFE_OVER = "scannerLightLifeOver";
530	const SCANNER_LIGHT_MISSING = "scannerLightMissing";
531	const SCANNER_SENSOR_FAILURE = "scannerSensorFailure";
532	const SCANNER_SENSOR_LIFE_ALMOST_OVER = "scannerSensorLifeAlmostOver";
533	const SCANNER_SENSOR_LIFE_OVER = "scannerSensorLifeOver";
534	const SCANNER_SENSOR_MISSING = "scannerSensorMissing";
535	const SEPARATION_CUTTER_ADDED = "separationCutterAdded";
536	const SEPARATION_CUTTER_ALMOST_EMPTY = "separationCutterAlmostEmpty";
537	const SEPARATION_CUTTER_ALMOST_FULL = "separationCutterAlmostFull";
538	const SEPARATION_CUTTER_AT_LIMIT = "separationCutterAtLimit";
539	const SEPARATION_CUTTER_CLOSED = "separationCutterClosed";
540	const SEPARATION_CUTTER_CONFIGURATION_CHANGE = "separationCutterConfigurationChange";
541	const SEPARATION_CUTTER_COVER_CLOSED = "separationCutterCoverClosed";
542	const SEPARATION_CUTTER_COVER_OPEN = "separationCutterCoverOpen";
543	const SEPARATION_CUTTER_EMPTY = "separationCutterEmpty";
544	const SEPARATION_CUTTER_FULL = "separationCutterFull";
545	const SEPARATION_CUTTER_INTERLOCK_CLOSED = "separationCutterInterlockClosed";
546	const SEPARATION_CUTTER_INTERLOCK_OPEN = "separationCutterInterlockOpen";
547	const SEPARATION_CUTTER_JAM = "separationCutterJam";
548	const SEPARATION_CUTTER_LIFE_ALMOST_OVER = "separationCutterLifeAlmostOver";
549	const SEPARATION_CUTTER_LIFE_OVER = "separationCutterLifeOver";
550	const SEPARATION_CUTTER_MEMORY_EXHAUSTED = "separationCutterMemoryExhausted";
551	const SEPARATION_CUTTER_MISSING = "separationCutterMissing";
552	const SEPARATION_CUTTER_MOTOR_FAILURE = "separationCutterMotorFailure";
553	const SEPARATION_CUTTER_NEAR_LIMIT = "separationCutterNearLimit";
554	const SEPARATION_CUTTER_OFFLINE = "separationCutterOffline";
555	const SEPARATION_CUTTER_OPENED = "separationCutterOpened";
556	const SEPARATION_CUTTER_OVER_TEMPERATURE = "separationCutterOverTemperature";
557	const SEPARATION_CUTTER_POWER_SAVER = "separationCutterPowerSaver";
558	const SEPARATION_CUTTER_RECOVERABLE_FAILURE = "separationCutterRecoverableFailure";
559	const SEPARATION_CUTTER_RECOVERABLE_STORAGE = "separationCutterRecoverableStorage";
560	const SEPARATION_CUTTER_REMOVED = "separationCutterRemoved";
561	const SEPARATION_CUTTER_RESOURCE_ADDED = "separationCutterResourceAdded";
562	const SEPARATION_CUTTER_RESOURCE_REMOVED = "separationCutterResourceRemoved";
563	const SEPARATION_CUTTER_THERMISTOR_FAILURE = "separationCutterThermistorFailure";
564	const SEPARATION_CUTTER_TIMING_FAILURE = "separationCutterTimingFailure";
565	const SEPARATION_CUTTER_TURNED_OFF = "separationCutterTurnedOff";
566	const SEPARATION_CUTTER_TURNED_ON = "separationCutterTurnedOn";
567	const SEPARATION_CUTTER_UNDER_TEMPERATURE = "separationCutterUnderTemperature";
568	const SEPARATION_CUTTER_UNRECOVERABLE_FAILURE = "separationCutterUnrecoverableFailure";
569	const SEPARATION_CUTTER_UNRECOVERABLE_STORAGE_ERROR = "separationCutterUnrecoverableStorageError";
570	const SEPARATION_CUTTER_WARMING_UP = "separationCutterWarmingUp";
571	const SHEET_ROTATOR_ADDED = "sheetRotatorAdded";
572	const SHEET_ROTATOR_ALMOST_EMPTY = "sheetRotatorAlmostEmpty";
573	const SHEET_ROTATOR_ALMOST_FULL = "sheetRotatorAlmostFull";
574	const SHEET_ROTATOR_AT_LIMIT = "sheetRotatorAtLimit";
575	const SHEET_ROTATOR_CLOSED = "sheetRotatorClosed";
576	const SHEET_ROTATOR_CONFIGURATION_CHANGE = "sheetRotatorConfigurationChange";
577	const SHEET_ROTATOR_COVER_CLOSED = "sheetRotatorCoverClosed";
578	const SHEET_ROTATOR_COVER_OPEN = "sheetRotatorCoverOpen";
579	const SHEET_ROTATOR_EMPTY = "sheetRotatorEmpty";
580	const SHEET_ROTATOR_FULL = "sheetRotatorFull";
581	const SHEET_ROTATOR_INTERLOCK_CLOSED = "sheetRotatorInterlockClosed";
582	const SHEET_ROTATOR_INTERLOCK_OPEN = "sheetRotatorInterlockOpen";
583	const SHEET_ROTATOR_JAM = "sheetRotatorJam";
584	const SHEET_ROTATOR_LIFE_ALMOST_OVER = "sheetRotatorLifeAlmostOver";
585	const SHEET_ROTATOR_LIFE_OVER = "sheetRotatorLifeOver";
586	const SHEET_ROTATOR_MEMORY_EXHAUSTED = "sheetRotatorMemoryExhausted";
587	const SHEET_ROTATOR_MISSING = "sheetRotatorMissing";
588	const SHEET_ROTATOR_MOTOR_FAILURE = "sheetRotatorMotorFailure";
589	const SHEET_ROTATOR_NEAR_LIMIT = "sheetRotatorNearLimit";
590	const SHEET_ROTATOR_OFFLINE = "sheetRotatorOffline";
591	const SHEET_ROTATOR_OPENED = "sheetRotatorOpened";
592	const SHEET_ROTATOR_OVER_TEMPERATURE = "sheetRotatorOverTemperature";
593	const SHEET_ROTATOR_POWER_SAVER = "sheetRotatorPowerSaver";
594	const SHEET_ROTATOR_RECOVERABLE_FAILURE = "sheetRotatorRecoverableFailure";
595	const SHEET_ROTATOR_RECOVERABLE_STORAGE = "sheetRotatorRecoverableStorage";
596	const SHEET_ROTATOR_REMOVED = "sheetRotatorRemoved";
597	const SHEET_ROTATOR_RESOURCE_ADDED = "sheetRotatorResourceAdded";
598	const SHEET_ROTATOR_RESOURCE_REMOVED = "sheetRotatorResourceRemoved";
599	const SHEET_ROTATOR_THERMISTOR_FAILURE = "sheetRotatorThermistorFailure";
600	const SHEET_ROTATOR_TIMING_FAILURE = "sheetRotatorTimingFailure";
601	const SHEET_ROTATOR_TURNED_OFF = "sheetRotatorTurnedOff";
602	const SHEET_ROTATOR_TURNED_ON = "sheetRotatorTurnedOn";
603	const SHEET_ROTATOR_UNDER_TEMPERATURE = "sheetRotatorUnderTemperature";
604	const SHEET_ROTATOR_UNRECOVERABLE_FAILURE = "sheetRotatorUnrecoverableFailure";
605	const SHEET_ROTATOR_UNRECOVERABLE_STORAGE_ERROR = "sheetRotatorUnrecoverableStorageError";
606	const SHEET_ROTATOR_WARMING_UP = "sheetRotatorWarmingUp";
607	const SLITTER_ADDED = "slitterAdded";
608	const SLITTER_ALMOST_EMPTY = "slitterAlmostEmpty";
609	const SLITTER_ALMOST_FULL = "slitterAlmostFull";
610	const SLITTER_AT_LIMIT = "slitterAtLimit";
611	const SLITTER_CLOSED = "slitterClosed";
612	const SLITTER_CONFIGURATION_CHANGE = "slitterConfigurationChange";
613	const SLITTER_COVER_CLOSED = "slitterCoverClosed";
614	const SLITTER_COVER_OPEN = "slitterCoverOpen";
615	const SLITTER_EMPTY = "slitterEmpty";
616	const SLITTER_FULL = "slitterFull";
617	const SLITTER_INTERLOCK_CLOSED = "slitterInterlockClosed";
618	const SLITTER_INTERLOCK_OPEN = "slitterInterlockOpen";
619	const SLITTER_JAM = "slitterJam";
620	const SLITTER_LIFE_ALMOST_OVER = "slitterLifeAlmostOver";
621	const SLITTER_LIFE_OVER = "slitterLifeOver";
622	const SLITTER_MEMORY_EXHAUSTED = "slitterMemoryExhausted";
623	const SLITTER_MISSING = "slitterMissing";
624	const SLITTER_MOTOR_FAILURE = "slitterMotorFailure";
625	const SLITTER_NEAR_LIMIT = "slitterNearLimit";
626	const SLITTER_OFFLINE = "slitterOffline";
627	const SLITTER_OPENED = "slitterOpened";
628	const SLITTER_OVER_TEMPERATURE = "slitterOverTemperature";
629	const SLITTER_POWER_SAVER = "slitterPowerSaver";
630	const SLITTER_RECOVERABLE_FAILURE = "slitterRecoverableFailure";
631	const SLITTER_RECOVERABLE_STORAGE = "slitterRecoverableStorage";
632	const SLITTER_REMOVED = "slitterRemoved";
633	const SLITTER_RESOURCE_ADDED = "slitterResourceAdded";
634	const SLITTER_RESOURCE_REMOVED = "slitterResourceRemoved";
635	const SLITTER_THERMISTOR_FAILURE = "slitterThermistorFailure";
636	const SLITTER_TIMING_FAILURE = "slitterTimingFailure";
637	const SLITTER_TURNED_OFF = "slitterTurnedOff";
638	const SLITTER_TURNED_ON = "slitterTurnedOn";
639	const SLITTER_UNDER_TEMPERATURE = "slitterUnderTemperature";
640	const SLITTER_UNRECOVERABLE_FAILURE = "slitterUnrecoverableFailure";
641	const SLITTER_UNRECOVERABLE_STORAGE_ERROR = "slitterUnrecoverableStorageError";
642	const SLITTER_WARMING_UP = "slitterWarmingUp";
643	const STACKER_ADDED = "stackerAdded";
644	const STACKER_ALMOST_EMPTY = "stackerAlmostEmpty";
645	const STACKER_ALMOST_FULL = "stackerAlmostFull";
646	const STACKER_AT_LIMIT = "stackerAtLimit";
647	const STACKER_CLOSED = "stackerClosed";
648	const STACKER_CONFIGURATION_CHANGE = "stackerConfigurationChange";
649	const STACKER_COVER_CLOSED = "stackerCoverClosed";
650	const STACKER_COVER_OPEN = "stackerCoverOpen";
651	const STACKER_EMPTY = "stackerEmpty";
652	const STACKER_FULL = "stackerFull";
653	const STACKER_INTERLOCK_CLOSED = "stackerInterlockClosed";
654	const STACKER_INTERLOCK_OPEN = "stackerInterlockOpen";
655	const STACKER_JAM = "stackerJam";
656	const STACKER_LIFE_ALMOST_OVER = "stackerLifeAlmostOver";
657	const STACKER_LIFE_OVER = "stackerLifeOver";
658	const STACKER_MEMORY_EXHAUSTED = "stackerMemoryExhausted";
659	const STACKER_MISSING = "stackerMissing";
660	const STACKER_MOTOR_FAILURE = "stackerMotorFailure";
661	const STACKER_NEAR_LIMIT = "stackerNearLimit";
662	const STACKER_OFFLINE = "stackerOffline";
663	const STACKER_OPENED = "stackerOpened";
664	const STACKER_OVER_TEMPERATURE = "stackerOverTemperature";
665	const STACKER_POWER_SAVER = "stackerPowerSaver";
666	const STACKER_RECOVERABLE_FAILURE = "stackerRecoverableFailure";
667	const STACKER_RECOVERABLE_STORAGE = "stackerRecoverableStorage";
668	const STACKER_REMOVED = "stackerRemoved";
669	const STACKER_RESOURCE_ADDED = "stackerResourceAdded";
670	const STACKER_RESOURCE_REMOVED = "stackerResourceRemoved";
671	const STACKER_THERMISTOR_FAILURE = "stackerThermistorFailure";
672	const STACKER_TIMING_FAILURE = "stackerTimingFailure";
673	const STACKER_TURNED_OFF = "stackerTurnedOff";
674	const STACKER_TURNED_ON = "stackerTurnedOn";
675	const STACKER_UNDER_TEMPERATURE = "stackerUnderTemperature";
676	const STACKER_UNRECOVERABLE_FAILURE = "stackerUnrecoverableFailure";
677	const STACKER_UNRECOVERABLE_STORAGE_ERROR = "stackerUnrecoverableStorageError";
678	const STACKER_WARMING_UP = "stackerWarmingUp";
679	const STANDBY = "standby";
680	const STAPLER_ADDED = "staplerAdded";
681	const STAPLER_ALMOST_EMPTY = "staplerAlmostEmpty";
682	const STAPLER_ALMOST_FULL = "staplerAlmostFull";
683	const STAPLER_AT_LIMIT = "staplerAtLimit";
684	const STAPLER_CLOSED = "staplerClosed";
685	const STAPLER_CONFIGURATION_CHANGE = "staplerConfigurationChange";
686	const STAPLER_COVER_CLOSED = "staplerCoverClosed";
687	const STAPLER_COVER_OPEN = "staplerCoverOpen";
688	const STAPLER_EMPTY = "staplerEmpty";
689	const STAPLER_FULL = "staplerFull";
690	const STAPLER_INTERLOCK_CLOSED = "staplerInterlockClosed";
691	const STAPLER_INTERLOCK_OPEN = "staplerInterlockOpen";
692	const STAPLER_JAM = "staplerJam";
693	const STAPLER_LIFE_ALMOST_OVER = "staplerLifeAlmostOver";
694	const STAPLER_LIFE_OVER = "staplerLifeOver";
695	const STAPLER_MEMORY_EXHAUSTED = "staplerMemoryExhausted";
696	const STAPLER_MISSING = "staplerMissing";
697	const STAPLER_MOTOR_FAILURE = "staplerMotorFailure";
698	const STAPLER_NEAR_LIMIT = "staplerNearLimit";
699	const STAPLER_OFFLINE = "staplerOffline";
700	const STAPLER_OPENED = "staplerOpened";
701	const STAPLER_OVER_TEMPERATURE = "staplerOverTemperature";
702	const STAPLER_POWER_SAVER = "staplerPowerSaver";
703	const STAPLER_RECOVERABLE_FAILURE = "staplerRecoverableFailure";
704	const STAPLER_RECOVERABLE_STORAGE = "staplerRecoverableStorage";
705	const STAPLER_REMOVED = "staplerRemoved";
706	const STAPLER_RESOURCE_ADDED = "staplerResourceAdded";
707	const STAPLER_RESOURCE_REMOVED = "staplerResourceRemoved";
708	const STAPLER_THERMISTOR_FAILURE = "staplerThermistorFailure";
709	const STAPLER_TIMING_FAILURE = "staplerTimingFailure";
710	const STAPLER_TURNED_OFF = "staplerTurnedOff";
711	const STAPLER_TURNED_ON = "staplerTurnedOn";
712	const STAPLER_UNDER_TEMPERATURE = "staplerUnderTemperature";
713	const STAPLER_UNRECOVERABLE_FAILURE = "staplerUnrecoverableFailure";
714	const STAPLER_UNRECOVERABLE_STORAGE_ERROR = "staplerUnrecoverableStorageError";
715	const STAPLER_WARMING_UP = "staplerWarmingUp";
716	const STITCHER_ADDED = "stitcherAdded";
717	const STITCHER_ALMOST_EMPTY = "stitcherAlmostEmpty";
718	const STITCHER_ALMOST_FULL = "stitcherAlmostFull";
719	const STITCHER_AT_LIMIT = "stitcherAtLimit";
720	const STITCHER_CLOSED = "stitcherClosed";
721	const STITCHER_CONFIGURATION_CHANGE = "stitcherConfigurationChange";
722	const STITCHER_COVER_CLOSED = "stitcherCoverClosed";
723	const STITCHER_COVER_OPEN = "stitcherCoverOpen";
724	const STITCHER_EMPTY = "stitcherEmpty";
725	const STITCHER_FULL = "stitcherFull";
726	const STITCHER_INTERLOCK_CLOSED = "stitcherInterlockClosed";
727	const STITCHER_INTERLOCK_OPEN = "stitcherInterlockOpen";
728	const STITCHER_JAM = "stitcherJam";
729	const STITCHER_LIFE_ALMOST_OVER = "stitcherLifeAlmostOver";
730	const STITCHER_LIFE_OVER = "stitcherLifeOver";
731	const STITCHER_MEMORY_EXHAUSTED = "stitcherMemoryExhausted";
732	const STITCHER_MISSING = "stitcherMissing";
733	const STITCHER_MOTOR_FAILURE = "stitcherMotorFailure";
734	const STITCHER_NEAR_LIMIT = "stitcherNearLimit";
735	const STITCHER_OFFLINE = "stitcherOffline";
736	const STITCHER_OPENED = "stitcherOpened";
737	const STITCHER_OVER_TEMPERATURE = "stitcherOverTemperature";
738	const STITCHER_POWER_SAVER = "stitcherPowerSaver";
739	const STITCHER_RECOVERABLE_FAILURE = "stitcherRecoverableFailure";
740	const STITCHER_RECOVERABLE_STORAGE = "stitcherRecoverableStorage";
741	const STITCHER_REMOVED = "stitcherRemoved";
742	const STITCHER_RESOURCE_ADDED = "stitcherResourceAdded";
743	const STITCHER_RESOURCE_REMOVED = "stitcherResourceRemoved";
744	const STITCHER_THERMISTOR_FAILURE = "stitcherThermistorFailure";
745	const STITCHER_TIMING_FAILURE = "stitcherTimingFailure";
746	const STITCHER_TURNED_OFF = "stitcherTurnedOff";
747	const STITCHER_TURNED_ON = "stitcherTurnedOn";
748	const STITCHER_UNDER_TEMPERATURE = "stitcherUnderTemperature";
749	const STITCHER_UNRECOVERABLE_FAILURE = "stitcherUnrecoverableFailure";
750	const STITCHER_UNRECOVERABLE_STORAGE_ERROR = "stitcherUnrecoverableStorageError";
751	const STITCHER_WARMING_UP = "stitcherWarmingUp";
752	const SUBUNIT_ADDED = "subunitAdded";
753	const SUBUNIT_ALMOST_EMPTY = "subunitAlmostEmpty";
754	const SUBUNIT_ALMOST_FULL = "subunitAlmostFull";
755	const SUBUNIT_AT_LIMIT = "subunitAtLimit";
756	const SUBUNIT_CLOSED = "subunitClosed";
757	const SUBUNIT_COOLING_DOWN = "subunitCoolingDown";
758	const SUBUNIT_EMPTY = "subunitEmpty";
759	const SUBUNIT_FULL = "subunitFull";
760	const SUBUNIT_LIFE_ALMOST_OVER = "subunitLifeAlmostOver";
761	const SUBUNIT_LIFE_OVER = "subunitLifeOver";
762	const SUBUNIT_MEMORY_EXHAUSTED = "subunitMemoryExhausted";
763	const SUBUNIT_MISSING = "subunitMissing";
764	const SUBUNIT_MOTOR_FAILURE = "subunitMotorFailure";
765	const SUBUNIT_NEAR_LIMIT = "subunitNearLimit";
766	const SUBUNIT_OFFLINE = "subunitOffline";
767	const SUBUNIT_OPENED = "subunitOpened";
768	const SUBUNIT_OVER_TEMPERATURE = "subunitOverTemperature";
769	const SUBUNIT_POWER_SAVER = "subunitPowerSaver";
770	const SUBUNIT_RECOVERABLE_FAILURE = "subunitRecoverableFailure";
771	const SUBUNIT_RECOVERABLE_STORAGE = "subunitRecoverableStorage";
772	const SUBUNIT_REMOVED = "subunitRemoved";
773	const SUBUNIT_RESOURCE_ADDED = "subunitResourceAdded";
774	const SUBUNIT_RESOURCE_REMOVED = "subunitResourceRemoved";
775	const SUBUNIT_THERMISTOR_FAILURE = "subunitThermistorFailure";
776	const SUBUNIT_TIMING_FAILURE = "subunitTimingFailure";
777	const SUBUNIT_TURNED_OFF = "subunitTurnedOff";
778	const SUBUNIT_TURNED_ON = "subunitTurnedOn";
779	const SUBUNIT_UNDER_TEMPERATURE = "subunitUnderTemperature";
780	const SUBUNIT_UNRECOVERABLE_FAILURE = "subunitUnrecoverableFailure";
781	const SUBUNIT_UNRECOVERABLE_STORAGE = "subunitUnrecoverableStorage";
782	const SUBUNIT_WARMING_UP = "subunitWarmingUp";
783	const SUSPEND = "suspend";
784	const TESTING = "testing";
785	const TRIMMER_ADDED = "trimmerAdded";
786	const TRIMMER_ALMOST_EMPTY = "trimmerAlmostEmpty";
787	const TRIMMER_ALMOST_FULL = "trimmerAlmostFull";
788	const TRIMMER_AT_LIMIT = "trimmerAtLimit";
789	const TRIMMER_CLOSED = "trimmerClosed";
790	const TRIMMER_CONFIGURATION_CHANGE = "trimmerConfigurationChange";
791	const TRIMMER_COVER_CLOSED = "trimmerCoverClosed";
792	const TRIMMER_COVER_OPEN = "trimmerCoverOpen";
793	const TRIMMER_EMPTY = "trimmerEmpty";
794	const TRIMMER_FULL = "trimmerFull";
795	const TRIMMER_INTERLOCK_CLOSED = "trimmerInterlockClosed";
796	const TRIMMER_INTERLOCK_OPEN = "trimmerInterlockOpen";
797	const TRIMMER_JAM = "trimmerJam";
798	const TRIMMER_LIFE_ALMOST_OVER = "trimmerLifeAlmostOver";
799	const TRIMMER_LIFE_OVER = "trimmerLifeOver";
800	const TRIMMER_MEMORY_EXHAUSTED = "trimmerMemoryExhausted";
801	const TRIMMER_MISSING = "trimmerMissing";
802	const TRIMMER_MOTOR_FAILURE = "trimmerMotorFailure";
803	const TRIMMER_NEAR_LIMIT = "trimmerNearLimit";
804	const TRIMMER_OFFLINE = "trimmerOffline";
805	const TRIMMER_OPENED = "trimmerOpened";
806	const TRIMMER_OVER_TEMPERATURE = "trimmerOverTemperature";
807	const TRIMMER_POWER_SAVER = "trimmerPowerSaver";
808	const TRIMMER_RECOVERABLE_FAILURE = "trimmerRecoverableFailure";
809	const TRIMMER_RECOVERABLE_STORAGE = "trimmerRecoverableStorage";
810	const TRIMMER_REMOVED = "trimmerRemoved";
811	const TRIMMER_RESOURCE_ADDED = "trimmerResourceAdded";
812	const TRIMMER_RESOURCE_REMOVED = "trimmerResourceRemoved";
813	const TRIMMER_THERMISTOR_FAILURE = "trimmerThermistorFailure";
814	const TRIMMER_TIMING_FAILURE = "trimmerTimingFailure";
815	const TRIMMER_TURNED_OFF = "trimmerTurnedOff";
816	const TRIMMER_TURNED_ON = "trimmerTurnedOn";
817	const TRIMMER_UNDER_TEMPERATURE = "trimmerUnderTemperature";
818	const TRIMMER_UNRECOVERABLE_FAILURE = "trimmerUnrecoverableFailure";
819	const TRIMMER_UNRECOVERABLE_STORAGE_ERROR = "trimmerUnrecoverableStorageError";
820	const TRIMMER_WARMING_UP = "trimmerWarmingUp";
821	const UNKNOWN = "unknown";
822	const WRAPPER_ADDED = "wrapperAdded";
823	const WRAPPER_ALMOST_EMPTY = "wrapperAlmostEmpty";
824	const WRAPPER_ALMOST_FULL = "wrapperAlmostFull";
825	const WRAPPER_AT_LIMIT = "wrapperAtLimit";
826	const WRAPPER_CLOSED = "wrapperClosed";
827	const WRAPPER_CONFIGURATION_CHANGE = "wrapperConfigurationChange";
828	const WRAPPER_COVER_CLOSED = "wrapperCoverClosed";
829	const WRAPPER_COVER_OPEN = "wrapperCoverOpen";
830	const WRAPPER_EMPTY = "wrapperEmpty";
831	const WRAPPER_FULL = "wrapperFull";
832	const WRAPPER_INTERLOCK_CLOSED = "wrapperInterlockClosed";
833	const WRAPPER_INTERLOCK_OPEN = "wrapperInterlockOpen";
834	const WRAPPER_JAM = "wrapperJam";
835	const WRAPPER_LIFE_ALMOST_OVER = "wrapperLifeAlmostOver";
836	const WRAPPER_LIFE_OVER = "wrapperLifeOver";
837	const WRAPPER_MEMORY_EXHAUSTED = "wrapperMemoryExhausted";
838	const WRAPPER_MISSING = "wrapperMissing";
839	const WRAPPER_MOTOR_FAILURE = "wrapperMotorFailure";
840	const WRAPPER_NEAR_LIMIT = "wrapperNearLimit";
841	const WRAPPER_OFFLINE = "wrapperOffline";
842	const WRAPPER_OPENED = "wrapperOpened";
843	const WRAPPER_OVER_TEMPERATURE = "wrapperOverTemperature";
844	const WRAPPER_POWER_SAVER = "wrapperPowerSaver";
845	const WRAPPER_RECOVERABLE_FAILURE = "wrapperRecoverableFailure";
846	const WRAPPER_RECOVERABLE_STORAGE = "wrapperRecoverableStorage";
847	const WRAPPER_REMOVED = "wrapperRemoved";
848	const WRAPPER_RESOURCE_ADDED = "wrapperResourceAdded";
849	const WRAPPER_RESOURCE_REMOVED = "wrapperResourceRemoved";
850	const WRAPPER_THERMISTOR_FAILURE = "wrapperThermistorFailure";
851	const WRAPPER_TIMING_FAILURE = "wrapperTimingFailure";
852	const WRAPPER_TURNED_OFF = "wrapperTurnedOff";
853	const WRAPPER_TURNED_ON = "wrapperTurnedOn";
854	const WRAPPER_UNDER_TEMPERATURE = "wrapperUnderTemperature";
855	const WRAPPER_UNRECOVERABLE_FAILURE = "wrapperUnrecoverableFailure";
856	const WRAPPER_UNRECOVERABLE_STORAGE_ERROR = "wrapperUnrecoverableStorageError";
857	const WRAPPER_WARMING_UP = "wrapperWarmingUp";
858	}
859