PluginProbe
PDF & Print by BestWebSoft – WordPress Posts and Pages PDF Generator Plugin / 1.7.6
PDF & Print by BestWebSoft – WordPress Posts and Pages PDF Generator Plugin v1.7.6
trunk 1.5 1.6 1.7 1.7.1 1.7.2 1.7.3 1.7.4 1.7.5 1.7.6 1.7.7 1.7.8 1.7.9 1.8.0 1.8.1 1.8.2 1.8.3 1.8.4 1.8.5 1.8.6 1.8.7 1.8.8 1.8.9 1.9.0 1.9.1 All 71 releases
pdf-print / mpdf / classes / grad.php

grad.php in PDF & Print by BestWebSoft – WordPress Posts and Pages PDF Generator Plugin 1.7.6, at mpdf/classes/grad.php

723 lines 32.1 KB
No matching file
Up and down to move Enter to open Esc to close
Raw Download Zip
1 <?php
2
3 class grad {
4
5 var $mpdf = null;
6
7 function grad(&$mpdf) {
8 $this->mpdf = $mpdf;
9 }
10
11 // mPDF 5.3.A1
12 function CoonsPatchMesh($x, $y, $w, $h, $patch_array=array(), $x_min=0, $x_max=1, $y_min=0, $y_max=1, $colspace='RGB', $return=false){
13 $s=' q ';
14 $s.=sprintf(' %.3F %.3F %.3F %.3F re W n ', $x*_MPDFK, ($this->mpdf->h-$y)*_MPDFK, $w*_MPDFK, -$h*_MPDFK);
15 $s.=sprintf(' %.3F 0 0 %.3F %.3F %.3F cm ', $w*_MPDFK, $h*_MPDFK, $x*_MPDFK, ($this->mpdf->h-($y+$h))*_MPDFK);
16 $n = count($this->mpdf->gradients)+1;
17 $this->mpdf->gradients[$n]['type'] = 6; //coons patch mesh
18 $this->mpdf->gradients[$n]['colorspace'] = $colspace; //coons patch mesh
19 $bpcd=65535; //16 BitsPerCoordinate
20 $trans = false;
21 $this->mpdf->gradients[$n]['stream']='';
22 for($i=0;$i<count($patch_array);$i++){
23 $this->mpdf->gradients[$n]['stream'].=chr($patch_array[$i]['f']); //start with the edge flag as 8 bit
24 for($j=0;$j<count($patch_array[$i]['points']);$j++){
25 //each point as 16 bit
26 if (($j % 2) == 1) { // Y coordinate (adjusted as input is From top left)
27 $patch_array[$i]['points'][$j]=(($patch_array[$i]['points'][$j]-$y_min)/($y_max-$y_min))*$bpcd;
28 $patch_array[$i]['points'][$j]=$bpcd-$patch_array[$i]['points'][$j];
29 }
30 else {
31 $patch_array[$i]['points'][$j]=(($patch_array[$i]['points'][$j]-$x_min)/($x_max-$x_min))*$bpcd;
32 }
33 if($patch_array[$i]['points'][$j]<0) $patch_array[$i]['points'][$j]=0;
34 if($patch_array[$i]['points'][$j]>$bpcd) $patch_array[$i]['points'][$j]=$bpcd;
35 $this->mpdf->gradients[$n]['stream'].=chr(floor($patch_array[$i]['points'][$j]/256));
36 $this->mpdf->gradients[$n]['stream'].=chr(floor($patch_array[$i]['points'][$j]%256));
37 }
38 for($j=0;$j<count($patch_array[$i]['colors']);$j++){
39 //each color component as 8 bit
40 if ($colspace=='RGB') {
41 $this->mpdf->gradients[$n]['stream'].=($patch_array[$i]['colors'][$j][1]);
42 $this->mpdf->gradients[$n]['stream'].=($patch_array[$i]['colors'][$j][2]);
43 $this->mpdf->gradients[$n]['stream'].=($patch_array[$i]['colors'][$j][3]);
44 if (isset($patch_array[$i]['colors'][$j][4]) && ord($patch_array[$i]['colors'][$j][4])<100) { $trans = true; }
45 }
46 else if ($colspace=='CMYK') {
47 $this->mpdf->gradients[$n]['stream'].=chr(ord($patch_array[$i]['colors'][$j][1])*2.55);
48 $this->mpdf->gradients[$n]['stream'].=chr(ord($patch_array[$i]['colors'][$j][2])*2.55);
49 $this->mpdf->gradients[$n]['stream'].=chr(ord($patch_array[$i]['colors'][$j][3])*2.55);
50 $this->mpdf->gradients[$n]['stream'].=chr(ord($patch_array[$i]['colors'][$j][4])*2.55);
51 if (isset($patch_array[$i]['colors'][$j][5]) && ord($patch_array[$i]['colors'][$j][5])<100) { $trans = true; }
52 }
53 else if ($colspace=='Gray') {
54 $this->mpdf->gradients[$n]['stream'].=($patch_array[$i]['colors'][$j][1]);
55 if ($patch_array[$i]['colors'][$j][2]==1) { $trans = true; } // transparency converted from rgba or cmyka()
56 }
57 }
58 }
59 // TRANSPARENCY
60 if ($trans) {
61 $this->mpdf->gradients[$n]['stream_trans']='';
62 for($i=0;$i<count($patch_array);$i++){
63 $this->mpdf->gradients[$n]['stream_trans'].=chr($patch_array[$i]['f']);
64 for($j=0;$j<count($patch_array[$i]['points']);$j++){
65 //each point as 16 bit
66 $this->mpdf->gradients[$n]['stream_trans'].=chr(floor($patch_array[$i]['points'][$j]/256));
67 $this->mpdf->gradients[$n]['stream_trans'].=chr(floor($patch_array[$i]['points'][$j]%256));
68 }
69 for($j=0;$j<count($patch_array[$i]['colors']);$j++){
70 //each color component as 8 bit // OPACITY
71 if ($colspace=='RGB') {
72 $this->mpdf->gradients[$n]['stream_trans'].=chr(intval(ord($patch_array[$i]['colors'][$j][4])*2.55));
73 }
74 else if ($colspace=='CMYK') {
75 $this->mpdf->gradients[$n]['stream_trans'].=chr(intval(ord($patch_array[$i]['colors'][$j][5])*2.55));
76 }
77 else if ($colspace=='Gray') {
78 $this->mpdf->gradients[$n]['stream_trans'].=chr(intval(ord($patch_array[$i]['colors'][$j][3])*2.55));
79 }
80 }
81 }
82 $this->mpdf->gradients[$n]['trans'] = true;
83 $s .= ' /TGS'.$n.' gs ';
84 }
85 //paint the gradient
86 $s .= '/Sh'.$n.' sh'."\n";
87 //restore previous Graphic State
88 $s .= 'Q'."\n";
89 if ($return) { return $s; }
90 else { $this->mpdf->_out($s); }
91 }
92
93
94 // type = linear:2; radial: 3;
95 // Linear: $coords - array of the form (x1, y1, x2, y2) which defines the gradient vector (see linear_gradient_coords.jpg).
96 // The default value is from left to right (x1=0, y1=0, x2=1, y2=0).
97 // Radial: $coords - array of the form (fx, fy, cx, cy, r) where (fx, fy) is the starting point of the gradient with color1,
98 // (cx, cy) is the center of the circle with color2, and r is the radius of the circle (see radial_gradient_coords.jpg).
99 // (fx, fy) should be inside the circle, otherwise some areas will not be defined
100 // $col = array(R,G,B/255); or array(G/255); or array(C,M,Y,K/100)
101 // $stops = array('col'=>$col [, 'opacity'=>0-1] [, 'offset'=>0-1])
102 function Gradient($x, $y, $w, $h, $type, $stops=array(), $colorspace='RGB', $coords='', $extend='', $return=false, $is_mask=false) {
103 if (strtoupper(substr($type,0,1)) == 'L') { $type = 2; } // linear
104 else if (strtoupper(substr($type,0,1)) == 'R') { $type = 3; } // radial
105 if ($colorspace != 'CMYK' && $colorspace != 'Gray') {
106 $colorspace = 'RGB';
107 }
108 $bboxw = $w;
109 $bboxh = $h;
110 $usex = $x;
111 $usey = $y;
112 $usew = $bboxw;
113 $useh = $bboxh;
114 if ($type < 1) { $type = 2; }
115 if ($coords[0]!==false && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$coords[0],$m)) {
116 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
117 if ($tmp) { $coords[0] = $tmp/$w; }
118 }
119 if ($coords[1]!==false && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$coords[1],$m)) {
120 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
121 if ($tmp) { $coords[1] = 1-($tmp/$h); }
122 }
123 // LINEAR
124 if ($type == 2) {
125 $angle = $coords[4];
126 $repeat = $coords[5];
127 // ALL POINTS SET (default for custom mPDF linear gradient) - no -moz
128 if ($coords[0]!==false && $coords[1]!==false && $coords[2]!==false && $coords[3]!==false) {
129 // do nothing - coords used as they are
130 }
131
132 // If both a <point> and <angle> are defined, the gradient axis starts from the point and runs along the angle. The end point is
133 // defined as before - in this case start points may not be in corners, and axis may not correctly fall in the right quadrant.
134 // NO end points (Angle defined & Start points)
135 else if ($angle!==false && $coords[0]!==false && $coords[1]!==false && $coords[2]===false && $coords[3]===false) {
136 if ($angle==0 || $angle==360) { $coords[3]=$coords[1]; if ($coords[0]==1) $coords[2]=2; else $coords[2]=1; }
137 else if ($angle==90) { $coords[2]=$coords[0]; $coords[3]=1; if ($coords[1]==1) $coords[3]=2; else $coords[3]=1; }
138 else if ($angle==180) { if ($coords[4]==0) $coords[2]=-1; else $coords[2]=0; $coords[3]=$coords[1]; }
139 else if ($angle==270) { $coords[2]=$coords[0]; if ($coords[1]==0) $coords[3]=-1; else $coords[3]=0; }
140 else {
141 $endx=1; $endy=1;
142 if ($angle <=90) {
143 if ($angle <=45) { $endy=tan(deg2rad($angle)); }
144 else { $endx=tan(deg2rad(90-$angle)); }
145 $b = atan2(($endy*$bboxh), ($endx*$bboxw));
146 $ny = 1 - $coords[1] - (tan($b) * (1-$coords[0]));
147 $tx = sin($b) * cos($b) * $ny;
148 $ty = cos($b) * cos($b) * $ny;
149 $coords[2] = 1+$tx; $coords[3] = 1-$ty;
150 }
151 else if ($angle <=180) {
152 if ($angle <=135) { $endx=tan(deg2rad($angle-90)); }
153 else { $endy=tan(deg2rad(180-$angle)); }
154 $b = atan2(($endy*$bboxh), ($endx*$bboxw));
155 $ny = 1 - $coords[1] - (tan($b) * ($coords[0]));
156 $tx = sin($b) * cos($b) * $ny;
157 $ty = cos($b) * cos($b) * $ny;
158 $coords[2] = -$tx; $coords[3] = 1-$ty;
159 }
160 else if ($angle <=270) {
161 if ($angle <=225) { $endy=tan(deg2rad($angle-180)); }
162 else { $endx=tan(deg2rad(270-$angle)); }
163 $b = atan2(($endy*$bboxh), ($endx*$bboxw));
164 $ny = $coords[1] - (tan($b) * ($coords[0]));
165 $tx = sin($b) * cos($b) * $ny;
166 $ty = cos($b) * cos($b) * $ny;
167 $coords[2] = -$tx; $coords[3] = $ty;
168 }
169 else {
170 if ($angle <=315) { $endx=tan(deg2rad($angle-270)); }
171 else { $endy=tan(deg2rad(360-$angle)); }
172 $b = atan2(($endy*$bboxh), ($endx*$bboxw));
173 $ny = $coords[1] - (tan($b) * (1-$coords[0]));
174 $tx = sin($b) * cos($b) * $ny;
175 $ty = cos($b) * cos($b) * $ny;
176 $coords[2] = 1+$tx; $coords[3] = $ty;
177
178 }
179 }
180 }
181
182 // -moz If the first parameter is only an <angle>, the gradient axis starts from the box's corner that would ensure the
183 // axis goes through the box. The axis runs along the specified angle. The end point of the axis is defined such that the
184 // farthest corner of the box from the starting point is perpendicular to the gradient axis at that point.
185 // NO end points or Start points (Angle defined)
186 else if ($angle!==false && $coords[0]===false && $coords[1]===false) {
187 if ($angle==0 || $angle==360) { $coords[0]=0; $coords[1]=0; $coords[2]=1; $coords[3]=0; }
188 else if ($angle==90) { $coords[0]=0; $coords[1]=0; $coords[2]=0; $coords[3]=1; }
189 else if ($angle==180) { $coords[0]=1; $coords[1]=0; $coords[2]=0; $coords[3]=0; }
190 else if ($angle==270) { $coords[0]=0; $coords[1]=1; $coords[2]=0; $coords[3]=0; }
191 else {
192 if ($angle <=90) {
193 $coords[0]=0; $coords[1]=0;
194 if ($angle <=45) { $endx=1; $endy=tan(deg2rad($angle)); }
195 else { $endx=tan(deg2rad(90-$angle)); $endy=1; }
196 }
197 else if ($angle <=180) {
198 $coords[0]=1; $coords[1]=0;
199 if ($angle <=135) { $endx=tan(deg2rad($angle-90)); $endy=1; }
200 else { $endx=1; $endy=tan(deg2rad(180-$angle)); }
201 }
202 else if ($angle <=270) {
203 $coords[0]=1; $coords[1]=1;
204 if ($angle <=225) { $endx=1; $endy=tan(deg2rad($angle-180)); }
205 else { $endx=tan(deg2rad(270-$angle)); $endy=1; }
206 }
207 else {
208 $coords[0]=0; $coords[1]=1;
209 if ($angle <=315) { $endx=tan(deg2rad($angle-270)); $endy=1; }
210 else { $endx=1; $endy=tan(deg2rad(360-$angle)); }
211 }
212 $b = atan2(($endy*$bboxh), ($endx*$bboxw));
213 $h2 = $bboxh - ($bboxh * tan($b));
214 $px = $bboxh + ($h2 * sin($b) * cos($b));
215 $py = ($bboxh * tan($b)) + ($h2 * sin($b) * sin($b));
216 $x1 = $px / $bboxh;
217 $y1 = $py / $bboxh;
218 if ($angle <=90) { $coords[2] = $x1; $coords[3] = $y1; }
219 else if ($angle <=180) { $coords[2] = 1-$x1; $coords[3] = $y1; }
220 else if ($angle <=270) { $coords[2] = 1-$x1; $coords[3] = 1-$y1; }
221 else { $coords[2] = $x1; $coords[3] = 1-$y1; }
222 }
223 }
224 // -moz If the first parameter to the gradient function is only a <point>, the gradient axis starts from the specified point,
225 // and ends at the point you would get if you rotated the starting point by 180 degrees about the center of the box that the
226 // gradient is to be applied to.
227 // NO angle and NO end points (Start points defined)
228 else if ((!isset($angle) || $angle===false) && $coords[0]!==false && $coords[1]!==false) { // should have start and end defined
229 $coords[2] = 1-$coords[0]; $coords[3] = 1-$coords[1];
230 $angle = rad2deg(atan2($coords[3]-$coords[1],$coords[2]-$coords[0]));
231 if ($angle < 0) { $angle += 360; }
232 else if ($angle > 360) { $angle -= 360; }
233 if ($angle!=0 && $angle!=360 && $angle!=90 && $angle!=180 && $angle!=270) {
234 if ($w >= $h) {
235 $coords[1] *= $h/$w ;
236 $coords[3] *= $h/$w ;
237 $usew = $useh = $bboxw;
238 $usey -= ($w-$h);
239 }
240 else {
241 $coords[0] *= $w/$h ;
242 $coords[2] *= $w/$h ;
243 $usew = $useh = $bboxh;
244 }
245 }
246 }
247
248 // -moz If neither a <point> or <angle> is specified, i.e. the entire function consists of only <stop> values, the gradient
249 // axis starts from the top of the box and runs vertically downwards, ending at the bottom of the box.
250 else { // default values T2B
251 // All values are set in parseMozGradient - so won't appear here
252 $coords = array(0,0,1,0); // default for original linear gradient (L2R)
253 }
254 $s = ' q';
255 $s .= sprintf(' %.3F %.3F %.3F %.3F re W n', $x*_MPDFK, ($this->mpdf->h-$y)*_MPDFK, $w*_MPDFK, -$h*_MPDFK)."\n";
256 $s .= sprintf(' %.3F 0 0 %.3F %.3F %.3F cm', $usew*_MPDFK, $useh*_MPDFK, $usex*_MPDFK, ($this->mpdf->h-($usey+$useh))*_MPDFK)."\n";
257 }
258
259 // RADIAL
260 else if ($type == 3) {
261 $radius = $coords[4];
262 $angle = $coords[5]; // ?? no effect
263 $shape = $coords[6];
264 $size = $coords[7];
265 $repeat = $coords[8];
266 // ALL POINTS AND RADIUS SET (default for custom mPDF radial gradient) - no -moz
267 if ($coords[0]!==false && $coords[1]!==false && $coords[2]!==false && $coords[3]!==false && $coords[4]!==false) {
268 // do nothing - coords used as they are
269 }
270 // If a <point> is defined
271 else if ($shape!==false && $size!==false) {
272 if ($coords[2]==false) { $coords[2] = $coords[0]; }
273 if ($coords[3]==false) { $coords[3] = $coords[1]; }
274 // ELLIPSE
275 if ($shape=='ellipse') {
276 $corner1 = sqrt(pow($coords[0],2) + pow($coords[1],2));
277 $corner2 = sqrt(pow($coords[0],2) + pow((1-$coords[1]),2));
278 $corner3 = sqrt(pow((1-$coords[0]),2) + pow($coords[1],2));
279 $corner4 = sqrt(pow((1-$coords[0]),2) + pow((1-$coords[1]),2));
280 if ($size=='closest-side') { $radius = min($coords[0], $coords[1], (1-$coords[0]), (1-$coords[1])); }
281 else if ($size=='closest-corner') { $radius = min($corner1, $corner2, $corner3, $corner4); }
282 else if ($size=='farthest-side') { $radius = max($coords[0], $coords[1], (1-$coords[0]), (1-$coords[1])); }
283 else { $radius = max($corner1, $corner2, $corner3, $corner4); } // farthest corner (default)
284 }
285 // CIRCLE
286 else if ($shape=='circle') {
287 if ($w >= $h) {
288 $coords[1] = $coords[3] = ($coords[1] * $h/$w) ;
289 $corner1 = sqrt(pow($coords[0],2) + pow($coords[1],2));
290 $corner2 = sqrt(pow($coords[0],2) + pow((($h/$w)-$coords[1]),2));
291 $corner3 = sqrt(pow((1-$coords[0]),2) + pow($coords[1],2));
292 $corner4 = sqrt(pow((1-$coords[0]),2) + pow((($h/$w)-$coords[1]),2));
293 if ($size=='closest-side') { $radius = min($coords[0], $coords[1], (1-$coords[0]), (($h/$w)-$coords[1])); }
294 else if ($size=='closest-corner') { $radius = min($corner1, $corner2, $corner3, $corner4); }
295 else if ($size=='farthest-side') { $radius = max($coords[0], $coords[1], (1-$coords[0]), (($h/$w)-$coords[1])); }
296 else if ($size=='farthest-corner') { $radius = max($corner1, $corner2, $corner3, $corner4); } // farthest corner (default)
297 $usew = $useh = $bboxw;
298 $usey -= ($w-$h);
299 }
300 else {
301 $coords[0] = $coords[2] = ($coords[0] * $w/$h) ;
302 $corner1 = sqrt(pow($coords[0],2) + pow($coords[1],2));
303 $corner2 = sqrt(pow($coords[0],2) + pow((1-$coords[1]),2));
304 $corner3 = sqrt(pow((($w/$h)-$coords[0]),2) + pow($coords[1],2));
305 $corner4 = sqrt(pow((($w/$h)-$coords[0]),2) + pow((1-$coords[1]),2));
306 if ($size=='closest-side') { $radius = min($coords[0], $coords[1], (($w/$h)-$coords[0]), (1-$coords[1])); }
307 else if ($size=='closest-corner') { $radius = min($corner1, $corner2, $corner3, $corner4); }
308 else if ($size=='farthest-side') { $radius = max($coords[0], $coords[1], (($w/$h)-$coords[0]), (1-$coords[1])); }
309 else if ($size=='farthest-corner') { $radius = max($corner1, $corner2, $corner3, $corner4); } // farthest corner (default)
310 $usew = $useh = $bboxh;
311 }
312 }
313 if ($radius==0) { $radius=0.001; } // to prevent error
314 $coords[4] = $radius;
315 }
316
317 // -moz If entire function consists of only <stop> values
318 else { // default values
319 // All values are set in parseMozGradient - so won't appear here
320 $coords = array(0.5,0.5,0.5,0.5); // default for radial gradient (centred)
321 }
322 $s = ' q';
323 $s .= sprintf(' %.3F %.3F %.3F %.3F re W n', $x*_MPDFK, ($this->mpdf->h-$y)*_MPDFK, $w*_MPDFK, -$h*_MPDFK)."\n";
324 $s .= sprintf(' %.3F 0 0 %.3F %.3F %.3F cm', $usew*_MPDFK, $useh*_MPDFK, $usex*_MPDFK, ($this->mpdf->h-($usey+$useh))*_MPDFK)."\n";
325 }
326
327 $n = count($this->mpdf->gradients) + 1;
328 $this->mpdf->gradients[$n]['type'] = $type;
329 $this->mpdf->gradients[$n]['colorspace'] = $colorspace;
330 $trans = false;
331 $this->mpdf->gradients[$n]['is_mask'] = $is_mask;
332 if ($is_mask) { $trans = true; }
333 if (count($stops) == 1) { $stops[1] = $stops[0]; }
334 if (!isset($stops[0]['offset'])) { $stops[0]['offset'] = 0; }
335 if (!isset($stops[(count($stops)-1)]['offset'])) { $stops[(count($stops)-1)]['offset'] = 1; }
336
337 // Fix stop-offsets set as absolute lengths
338 if ($type==2) {
339 $axisx = ($coords[2]-$coords[0])*$usew;
340 $axisy = ($coords[3]-$coords[1])*$useh;
341 $axis_length = sqrt(pow($axisx,2) + pow($axisy,2));
342 }
343 else { $axis_length = $coords[4]*$usew; } // Absolute lengths are meaningless for an ellipse - Firefox uses Width as reference
344
345 for($i=0;$i<count($stops);$i++) {
346 if (isset($stops[$i]['offset']) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$stops[$i]['offset'],$m)) {
347 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
348 $stops[$i]['offset'] = $tmp/$axis_length;
349 }
350 }
351
352
353 if (isset($stops[0]['offset']) && $stops[0]['offset']>0) {
354 $firststop = $stops[0];
355 $firststop['offset'] = 0;
356 array_unshift($stops, $firststop);
357 }
358 if (!$repeat && isset($stops[(count($stops)-1)]['offset']) && $stops[(count($stops)-1)]['offset']<1) {
359 $endstop = $stops[(count($stops)-1)];
360 $endstop['offset'] = 1;
361 $stops[] = $endstop;
362 }
363 if ($stops[0]['offset'] > $stops[(count($stops)-1)]['offset']) {
364 $stops[0]['offset'] = 0;
365 $stops[(count($stops)-1)]['offset'] = 1;
366 }
367
368 for($i=0;$i<count($stops);$i++) {
369 // mPDF 5.3.74
370 if ($colorspace == 'CMYK') {
371 $this->mpdf->gradients[$n]['stops'][$i]['col'] = sprintf('%.3F %.3F %.3F %.3F', (ord($stops[$i]['col']{1})/100), (ord($stops[$i]['col']{2})/100), (ord($stops[$i]['col']{3})/100), (ord($stops[$i]['col']{4})/100));
372 }
373 else if ($colorspace == 'Gray') {
374 $this->mpdf->gradients[$n]['stops'][$i]['col'] = sprintf('%.3F', (ord($stops[$i]['col']{1})/255));
375 }
376 else {
377 $this->mpdf->gradients[$n]['stops'][$i]['col'] = sprintf('%.3F %.3F %.3F', (ord($stops[$i]['col']{1})/255), (ord($stops[$i]['col']{2})/255), (ord($stops[$i]['col']{3})/255));
378 }
379 if (!isset($stops[$i]['opacity'])) { $stops[$i]['opacity'] = 1; }
380 else if ($stops[$i]['opacity'] > 1 || $stops[$i]['opacity'] < 0) { $stops[$i]['opacity'] = 1; }
381 else if ($stops[$i]['opacity'] < 1) {
382 $trans = true;
383 }
384 $this->mpdf->gradients[$n]['stops'][$i]['opacity'] = $stops[$i]['opacity'];
385 // OFFSET
386 if ($i>0 && $i<(count($stops)-1)) {
387 if (!isset($stops[$i]['offset']) || (isset($stops[$i+1]['offset']) && $stops[$i]['offset']>$stops[$i+1]['offset']) || $stops[$i]['offset']<$stops[$i-1]['offset']) {
388 if (isset($stops[$i-1]['offset']) && isset($stops[$i+1]['offset'])) {
389 $stops[$i]['offset'] = ($stops[$i-1]['offset']+$stops[$i+1]['offset'])/2;
390 }
391 else {
392 for($j=($i+1);$j<count($stops);$j++) {
393 if(isset($stops[$j]['offset'])) { break; }
394 }
395 $int = ($stops[$j]['offset'] - $stops[($i-1)]['offset'])/($j-$i+1);
396 for($f=0;$f<($j-$i-1);$f++) {
397 $stops[($i+$f)]['offset'] = $stops[($i+$f-1)]['offset'] + ($int);
398 }
399 }
400 }
401 }
402 $this->mpdf->gradients[$n]['stops'][$i]['offset'] = $stops[$i]['offset'];
403 $this->mpdf->gradients[$n]['stops'][$i]['offset'] = $stops[$i]['offset'];
404 }
405
406 if ($repeat) {
407 $ns = count($this->mpdf->gradients[$n]['stops']);
408 $offs = array();
409 for($i=0;$i<$ns;$i++) {
410 $offs[$i] = $this->mpdf->gradients[$n]['stops'][$i]['offset'];
411 }
412 $gp = 0;
413 $inside=true;
414 while($inside) {
415 $gp++;
416 for($i=0;$i<$ns;$i++) {
417 $this->mpdf->gradients[$n]['stops'][(($ns*$gp)+$i)] = $this->mpdf->gradients[$n]['stops'][(($ns*($gp-1))+$i)];
418 $tmp = $this->mpdf->gradients[$n]['stops'][(($ns*($gp-1))+($ns-1))]['offset']+$offs[$i] ;
419 if ($tmp < 1) { $this->mpdf->gradients[$n]['stops'][(($ns*$gp)+$i)]['offset'] = $tmp; }
420 else {
421 $this->mpdf->gradients[$n]['stops'][(($ns*$gp)+$i)]['offset'] = 1;
422 $inside = false;
423 break(2);
424 }
425 }
426 }
427 }
428
429 if ($trans) {
430 $this->mpdf->gradients[$n]['trans'] = true;
431 $s .= ' /TGS'.$n.' gs ';
432 }
433 if (!is_array($extend) || count($extend) <1) {
434 $extend=array('true', 'true'); // These are supposed to be quoted - appear in PDF file as text
435 }
436 $this->mpdf->gradients[$n]['coords'] = $coords;
437 $this->mpdf->gradients[$n]['extend'] = $extend;
438 //paint the gradient
439 $s .= '/Sh'.$n.' sh '."\n";
440 //restore previous Graphic State
441 $s .= ' Q '."\n";
442 if ($return) { return $s; }
443 else { $this->mpdf->_out($s); }
444 }
445
446
447 function parseMozGradient($bg) {
448 // background[-image]: -moz-linear-gradient(left, #c7Fdde 20%, #FF0000 );
449 // background[-image]: linear-gradient(left, #c7Fdde 20%, #FF0000 ); // CSS3
450 if (preg_match('/repeating-/',$bg)) { $repeat = true; }
451 else { $repeat = false; }
452 if (preg_match('/linear-gradient\((.*)\)/',$bg,$m)) {
453 $g = array();
454 $g['type'] = 2;
455 $g['colorspace'] = 'RGB';
456 $g['extend'] = array('true','true');
457 $v = trim($m[1]);
458 // Change commas inside e.g. rgb(x,x,x)
459 while(preg_match('/(\([^\)]*?),/',$v)) { $v = preg_replace('/(\([^\)]*?),/','\\1@',$v); }
460 // Remove spaces inside e.g. rgb(x, x, x)
461 while(preg_match('/(\([^\)]*?)[ ]/',$v)) { $v = preg_replace('/(\([^\)]*?)[ ]/','\\1',$v); }
462 $bgr = preg_split('/\s*,\s*/',$v);
463 for($i=0;$i<count($bgr);$i++) { $bgr[$i] = preg_replace('/@/', ',', $bgr[$i]); }
464 // Is first part $bgr[0] a valid point/angle?
465 $first = preg_split('/\s+/',trim($bgr[0]));
466 if (preg_match('/(left|center|right|bottom|top|deg|grad|rad)/i',$bgr[0]) && !preg_match('/(<#|rgb|rgba|hsl|hsla)/i',$bgr[0])) {
467 $startStops = 1;
468 }
469 else if (trim($first[(count($first)-1)]) === "0") {
470 $startStops = 1;
471 }
472 else {
473 $check = $this->mpdf->ConvertColor($first[0]);
474 if ($check) $startStops = 0;
475 else $startStops = 1;
476 }
477 // first part a valid point/angle?
478 if ($startStops == 1) { // default values
479 // [<point> || <angle>,] = [<% em px left center right bottom top> || <deg grad rad 0>,]
480 if (preg_match('/([\-]*[0-9\.]+)(deg|grad|rad)/i',$bgr[0],$m)) {
481 $angle = $m[1] + 0;
482 if (strtolower($m[2])=='deg') { $angle = $angle; }
483 else if (strtolower($m[2])=='grad') { $angle *= (360/400); }
484 else if (strtolower($m[2])=='rad') { $angle = rad2deg($angle); }
485 while($angle < 0) { $angle += 360; }
486 $angle = ($angle % 360);
487 }
488 else if (trim($first[(count($first)-1)]) === "0") { $angle = 0; }
489 if (preg_match('/left/i',$bgr[0])) { $startx = 0; }
490 else if (preg_match('/right/i',$bgr[0])) { $startx = 1; }
491 if (preg_match('/top/i',$bgr[0])) { $starty = 1; }
492 else if (preg_match('/bottom/i',$bgr[0])) { $starty = 0; }
493 // Check for %? ?% or %%
494 if (preg_match('/(\d+)[%]/i',$first[0],$m)) { $startx = $m[1]/100; }
495 else if (!isset($startx) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$first[0],$m)) {
496 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
497 if ($tmp) { $startx = $m[1]; }
498 }
499 if (isset($first[1]) && preg_match('/(\d+)[%]/i',$first[1],$m)) { $starty = 1 - ($m[1]/100); }
500 else if (!isset($starty) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$first[1],$m)) {
501 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
502 if ($tmp) { $starty = $m[1]; }
503 }
504 if (isset($startx) && !isset($starty)) { $starty = 0.5; }
505 if (!isset($startx) && isset($starty)) { $startx = 0.5; }
506
507 }
508 // If neither a <point> or <angle> is specified, i.e. the entire function consists of only <stop> values, the gradient axis starts from the top of the box and runs vertically downwards, ending at the bottom of the box.
509 else { // default values T2B
510 $starty = 1; $startx = 0.5;
511 $endy = 0; $endx = 0.5;
512 }
513 $coords = array();
514 if (!isset($startx)) { $startx = false; }
515 if (!isset($starty)) { $starty = false; }
516 if (!isset($endx)) { $endx = false; }
517 if (!isset($endy)) { $endy = false; }
518 if (!isset($angle)) { $angle = false; }
519 $g['coords'] = array($startx ,$starty ,$endx ,$endy, $angle, $repeat );
520 $g['stops'] = array();
521 for($i=$startStops;$i<count($bgr);$i++) {
522 $stop = array();
523 // parse stops
524 $el = preg_split('/\s+/',trim($bgr[$i]));
525 // mPDF 5.3.74
526 $col = $this->mpdf->ConvertColor($el[0]);
527 if ($col) { $stop['col'] = $col; }
528 else { $stop['col'] = $col = $this->mpdf->ConvertColor(255); }
529 if ($col{0}==1) $g['colorspace'] = 'Gray';
530 else if ($col{0}==4 || $col{0}==6) $g['colorspace'] = 'CMYK';
531 if ($col{0}==5) { $stop['opacity'] = ord($col{4})/100; } // transparency from rgba()
532 else if ($col{0}==6) { $stop['opacity'] = ord($col{5})/100; } // transparency from cmyka()
533 else if ($col{0}==1 && $col{2}==1) { $stop['opacity'] = ord($col{3})/100; } // transparency converted from rgba or cmyka()
534
535 if (isset($el[1]) && preg_match('/(\d+)[%]/',$el[1],$m)) {
536 $stop['offset'] = $m[1]/100;
537 if ($stop['offset']>1) { unset($stop['offset']); }
538 }
539 else if (isset($el[1]) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$el[1],$m)) {
540 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
541 if ($tmp) { $stop['offset'] = $m[1]; }
542 }
543 $g['stops'][] = $stop;
544 }
545 if (count($g['stops'] )) { return $g; }
546 }
547 else if (preg_match('/radial-gradient\((.*)\)/',$bg,$m)) {
548 $g = array();
549 $g['type'] = 3;
550 $g['colorspace'] = 'RGB';
551 $g['extend'] = array('true','true');
552 $v = trim($m[1]);
553 // Change commas inside e.g. rgb(x,x,x)
554 while(preg_match('/(\([^\)]*?),/',$v)) { $v = preg_replace('/(\([^\)]*?),/','\\1@',$v); }
555 // Remove spaces inside e.g. rgb(x, x, x)
556 while(preg_match('/(\([^\)]*?)[ ]/',$v)) { $v = preg_replace('/(\([^\)]*?)[ ]/','\\1',$v); }
557 $bgr = preg_split('/\s*,\s*/',$v);
558 for($i=0;$i<count($bgr);$i++) { $bgr[$i] = preg_replace('/@/', ',', $bgr[$i]); }
559
560 // Is first part $bgr[0] a valid point/angle?
561 $startStops = 0;
562 $pos_angle = false;
563 $shape_size = false;
564 $first = preg_split('/\s+/',trim($bgr[0]));
565 $checkCol = $this->mpdf->ConvertColor($first[0]);
566 if (preg_match('/(left|center|right|bottom|top|deg|grad|rad)/i',$bgr[0]) && !preg_match('/(<#|rgb|rgba|hsl|hsla)/i',$bgr[0])) {
567 $startStops=1;
568 $pos_angle = $bgr[0];
569 }
570 else if (trim($first[(count($first)-1)]) === "0") {
571 $startStops=1;
572 $pos_angle = $bgr[0];
573 }
574 else if (preg_match('/(circle|ellipse|closest-side|closest-corner|farthest-side|farthest-corner|contain|cover)/i',$bgr[0])) {
575 $startStops=1;
576 $shape_size = $bgr[0];
577 }
578 else if (!$checkCol) {
579 $startStops=1;
580 $pos_angle = $bgr[0];
581 }
582 if (preg_match('/(circle|ellipse|closest-side|closest-corner|farthest-side|farthest-corner|contain|cover)/i',$bgr[1])) {
583 $startStops=2;
584 $shape_size = $bgr[1];
585 }
586
587 // If valid point/angle?
588 if ($pos_angle) { // default values
589 // [<point> || <angle>,] = [<% em px left center right bottom top> || <deg grad rad 0>,]
590 if (preg_match('/left/i',$pos_angle)) { $startx = 0; }
591 else if (preg_match('/right/i',$pos_angle)) { $startx = 1; }
592 if (preg_match('/top/i',$pos_angle)) { $starty = 1; }
593 else if (preg_match('/bottom/i',$pos_angle)) { $starty = 0; }
594 // Check for %? ?% or %%
595 if (preg_match('/(\d+)[%]/i',$first[0],$m)) { $startx = $m[1]/100; }
596 else if (!isset($startx) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$first[0],$m)) {
597 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
598 if ($tmp) { $startx = $m[1]; }
599 }
600 if (isset($first[1]) && preg_match('/(\d+)[%]/i',$first[1],$m)) { $starty = 1 - ($m[1]/100); }
601 else if (!isset($starty) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$first[1],$m)) {
602 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
603 if ($tmp) { $starty = $m[1]; }
604 }
605
606 /*
607 // ?? Angle has no effect in radial gradient (does not exist in CSS3 spec.)
608 if (preg_match('/([\-]*[0-9\.]+)(deg|grad|rad)/i',$pos_angle,$m)) {
609 $angle = $m[1] + 0;
610 if (strtolower($m[2])=='deg') { $angle = $angle; }
611 else if (strtolower($m[2])=='grad') { $angle *= (360/400); }
612 else if (strtolower($m[2])=='rad') { $angle = rad2deg($angle); }
613 while($angle < 0) { $angle += 360; }
614 $angle = ($angle % 360);
615 }
616 */
617 if (!isset($starty)) { $starty = 0.5; }
618 if (!isset($startx)) { $startx = 0.5; }
619
620 }
621 // If neither a <point> or <angle> is specified, i.e. the entire function consists of only <stop> values, the gradient axis starts from the top of the box and runs vertically downwards, ending at the bottom of the box.
622 else { // default values Center
623 $starty = 0.5; $startx = 0.5;
624 $endy = 0.5; $endx = 0.5;
625 }
626
627 // If valid shape/size?
628 $shape = 'ellipse'; // default
629 $size = 'farthest-corner'; // default
630 if ($shape_size) { // default values
631 if (preg_match('/(circle|ellipse)/i',$shape_size, $m)) {
632 $shape = $m[1];
633 }
634 if (preg_match('/(closest-side|closest-corner|farthest-side|farthest-corner|contain|cover)/i',$shape_size, $m)) {
635 $size = $m[1];
636 if ($size=='contain') { $size = 'closest-side'; }
637 else if ($size=='cover') { $size = 'farthest-corner'; }
638 }
639 }
640
641 $coords = array();
642 if (!isset($startx)) { $startx = false; }
643 if (!isset($starty)) { $starty = false; }
644 if (!isset($endx)) { $endx = false; }
645 if (!isset($endy)) { $endy = false; }
646 if (!isset($radius)) { $radius = false; }
647 if (!isset($angle)) { $angle = 0; }
648 $g['coords'] = array($startx ,$starty ,$endx ,$endy, $radius, $angle, $shape, $size, $repeat );
649
650 $g['stops'] = array();
651 for($i=$startStops;$i<count($bgr);$i++) {
652 $stop = array();
653 // parse stops
654 $el = preg_split('/\s+/',trim($bgr[$i]));
655 // mPDF 5.3.74
656 $col = $this->mpdf->ConvertColor($el[0]);
657 if ($col) { $stop['col'] = $col; }
658 else { $stop['col'] = $col = $this->mpdf->ConvertColor(255); }
659 if ($col{0}==1) $g['colorspace'] = 'Gray';
660 else if ($col{0}==4 || $col{0}==6) $g['colorspace'] = 'CMYK';
661 if ($col{0}==5) { $stop['opacity'] = ord($col{4})/100; } // transparency from rgba()
662 else if ($col{0}==6) { $stop['opacity'] = ord($col{5})/100; } // transparency from cmyka()
663 else if ($col{0}==1 && $col{2}==1) { $stop['opacity'] = ord($col{3})/100; } // transparency converted from rgba or cmyka()
664
665 if (isset($el[1]) && preg_match('/(\d+)[%]/',$el[1],$m)) {
666 $stop['offset'] = $m[1]/100;
667 if ($stop['offset']>1) { unset($stop['offset']); }
668 }
669 else if (isset($el[1]) && preg_match('/([0-9.]+(px|em|ex|pc|pt|cm|mm|in))/i',$el[1],$m)) {
670 $tmp = $this->mpdf->ConvertSize($m[1],$this->mpdf->w,$this->mpdf->FontSize,false);
671 $stop['offset'] = $el[1];
672 }
673 $g['stops'][] = $stop;
674 }
675 if (count($g['stops'] )) { return $g; }
676 }
677 return array();
678 }
679
680 function parseBackgroundGradient($bg) {
681 // background-gradient: linear #00FFFF #FFFF00 0 0.5 1 0.5; or
682 // background-gradient: radial #00FFFF #FFFF00 0.5 0.5 1 1 1.2;
683
684 $v = trim($bg);
685 $bgr = preg_split('/\s+/',$v);
686 $g = array();
687 if (count($bgr)> 6) {
688 if (strtoupper(substr($bgr[0],0,1)) == 'L' && count($bgr)==7) { // linear
689 $g['type'] = 2;
690 //$coords = array(0,0,1,1 ); // 0 0 1 0 or 0 1 1 1 is L 2 R; 1,1,0,1 is R2L; 1,1,1,0 is T2B; 1,0,1,1 is B2T
691 // Linear: $coords - array of the form (x1, y1, x2, y2) which defines the gradient vector (see linear_gradient_coords.jpg).
692 // The default value is from left to right (x1=0, y1=0, x2=1, y2=0).
693 $g['coords'] = array($bgr[3], $bgr[4], $bgr[5], $bgr[6]);
694 }
695 else if (count($bgr)==8) { // radial
696 $g['type'] = 3;
697 // Radial: $coords - array of the form (fx, fy, cx, cy, r) where (fx, fy) is the starting point of the gradient with color1,
698 // (cx, cy) is the center of the circle with color2, and r is the radius of the circle (see radial_gradient_coords.jpg).
699 // (fx, fy) should be inside the circle, otherwise some areas will not be defined
700 $g['coords'] = array($bgr[3], $bgr[4], $bgr[5], $bgr[6], $bgr[7]);
701 }
702 $g['colorspace'] = 'RGB';
703 // mPDF 5.3.74
704 $cor = $this->mpdf->ConvertColor($bgr[1]);
705 if ($cor{0}==1) $g['colorspace'] = 'Gray';
706 else if ($cor{0}==4 || $cor{0}==6) $g['colorspace'] = 'CMYK';
707 if ($cor) { $g['col'] = $cor; }
708 else { $g['col'] = $this->mpdf->ConvertColor(255); }
709 $cor = $this->mpdf->ConvertColor($bgr[2]);
710 if ($cor) { $g['col2'] = $cor; }
711 else { $g['col2'] = $this->mpdf->ConvertColor(255); }
712 $g['extend'] = array('true','true');
713 $g['stops'] = array(array('col'=>$g['col'], 'opacity'=>1, 'offset'=>0), array('col'=>$g['col2'], 'opacity'=>1, 'offset'=>1));
714 return $g;
715 }
716 return false;
717 }
718
719
720
721 }
722
723 ?>